Table of Contents
Advertisement
TO MOUNT THE INVISILINK ENCLOSURE
1. Hold the enclosure against the wall in the desired location and mark the positions of the mounting holes.
Place the enclosure in a safe location.
2. Drill the mounting holes in the wall.
3. Attach the enclosure to the wall using hardware that will secure it firmly in place.
TO MOUNT THE ExTENDED RANGE ANTENNA,
The extended range antenna can either be mounted with the attached plate or with U-bolts, both included
as standard. The cable between the radio and the antenna is 2 ft (61 cm) in length; plan the location of
the unit and antenna accordingly.
If using the plate, pre-drill holes in desired location and bolt to structure.
If using the U-bolts, determine location on pipe or pole to mount the antenna and attach with mounting
hardware.
WRL180213 Rev. A
5
www.bindicator.com
Advertisement
Table of Contents
