Sony SAL20F28 Service Manual page 17

Lens for dslr camera

Hide thumbs Also See for SAL20F28:

Table of Contents

Ver 1.2 2007.05

HELP08

Anti-diffusion agent (A-20): J-6082-611-A

Adhesive bond (B-40):

J-6082-614-A

Apply the anti-diffusion agent (A-20) to the instruction portions of the outside barrel.

Install the back adjustment washers.

Attach the outside barrel so that the relationship of the preset ring pin and the hole for axis meet the position as shown in the figure.

Turn the outside barrel clockwise, eliminating play, and tighten four screws.

Note:

After performing "4-4-2 Flange back (f'F) adjustment", apply the adhesive bond (B-40) to the screwed portions of screws

and tighten screws.

Apply the adhesive bond(B-40)

Outside Barrel

Back Adjustment Washer

SAL20F28 (2.0/28) (20mm F2.8)

Apply the adhesive bond(B-40)

Apply the anti-diffusion agent(A-20)

(All circumference)

Preset Ring Pin

Hole for axis

HELP

Table of Contents