Sony SAL20F28 Service Manual page 16

Lens for dslr camera

Hide thumbs Also See for SAL20F28:

Table of Contents

HELP06

Adhesive bond (LOCTITE 460) (Note)

Note:

Use adhesive bond (LOCTITE 460) or an equivalent article.

Do not use what becomes white after drying like quick-drying glue.

Anti-diffusion agent (A-20): J-6082-611-A

Grease (G-85):

Apply the adhesive bond (LOCTITE 460) to the stopper screw, and attach it to the lens mount riveting block.

Apply the anti-diffusion agent (A-20) and grease (G-85) to the instruction portions of the lens mount riveting block.

Apply the adhesive bond(LOCTITE 460)

Apply the grease(G-85)

(3 claes)

Apply the anti-diffusion agent(A-20)

(All circumference)

Attach the lens mount riveting block, and check the operation of the aperture blade.

Turn the cam ring unit, and check the movement of the coupler.

HELP07

Grease (G-80): J-6082-625-A

Grease (G-85): J-6082-626-A

Apply the grease (G-85) to the gear and the grease (G-80) to the sliding surfaces of the coupler.

Apply the grease(G-85)

(Sliding surfaces)

SAL20F28 (2.0/28) (20mm F2.8)

J-6082-626-A

Lens Mount Riveting Block

Apply the grease(G-80)

(Geare)

HELP

Table of Contents