Selecting A Zone; Selecting A Radio Channel - Motorola PRO5100 Manual

SELECTING A ZONE

A zone is a group of up to 16 channels. Before
you can access a channel in a zone, you must
select the zone in one of two ways:
Method 1 (if programmed by your dealer [see
pages 4 - 5])
1 Press the Direct Zone Access button.
y
2
3 Press the Direct Zone Access button to
select the zone.
Method 2 (enhanced keypad microphone
required)
1 Press the Menu/Enter button to enter Menu
Mode.
y
2
3 Press the Menu/
Enter button to
select
10
English
z
or until you reach the desired zone.
z
Z Z Z Z o o o o n n n n e e e e
or until
Z Z Z Z o o o o n n n n e e e e
y z
4
or until you see the desired zone
name.
5 Press the Menu/Enter button to select the
zone.
SELECTING A RADIO
CHANNEL
Your radio offers 64 channels (4 zones of 16
channels each).
Note: Due to government regulations, some
channels may not be programmed.
See your dealer for more information.
There are three ways to select a channel:
Method 1
1 Select the appropriate Zone, if required.
y z
2 or until you reach the desired
channel, shown on the LCD display.
Method 2 (if programmed by your dealer [see
pages 4 - 5])