Track Skip - Sanyo MCD-XJ780A Instruction Manual

PLAY
PRG
RPT
RDM
Press and release repeatedly
Press and release repeatedly
To clear the program, press "STOP" during stop mode
To review the program memory status that you have made recently
1. To review programmed music track number, press "PRGRAM" once during stop mode with
"PRG" indication. LCD display shows programmed music track number in sequence and
stops with flashing indication of program memory no.1
2. To review programmed memory number. After operating 1), press PROGRAM one by one,
LCD display shows programmed memory number in flashing and programmed music track
number in sequence.
Note: Once you open CD door, all programs you have made are cleared.
PLAY
PRG
RPT
RDM
PAUSE
1.
2.

TRACK SKIP

1.
2.
PROGRAM
In stop state, press PROGRAM and use skip/search to select
the track will be program, press play to start program play.
1. Press PROGRAM, Program track 1 and
2. Press
3. Press PROGRAM to store the selected track.
REPEAT
1.
2.
Press REPEAT before or during
PLAY
play (or programmed play).
PRG
RPT
RDM
Press the PLAY/PAUSE button during play. Play will
temporarily stop.
Press the PLAY/PAUSE button again to resume play.
Press and release the
during play to quickly locate the beginning of a track.
The CD track number display will show the number of the
selected track.
"PRG" indicate and frash.
or SKIP to select disc track.
Display indicates next program track number.
Press REPEAT once- the indicator lights up and flash: A
single track is played repeatedly. Select a track with
.
Press REPEAT twice- the indicator lights up: All tracks
are played repeatedly.
6
or SKIP button repeatedly
PLAY
PRG
RPT
RDM
PLAY
PRG
RPT
RDM
PLAY
PRG
RPT
RDM
or