Download  Print this page

Skip Search - Sanyo MCD-S900F Instruction Manual

Cd radio cassette recorder
Hide thumbs

Advertisement

CD PLAY
Use compact
discs bearing
the symbol
shown
below.
In-addition
to conv&tionai
12 cm CDs,
this system can be used to play 8 cm CDs with-
out an adapter,
1.
2.
3.
4,
5.
Set the FUNCTION
switch to CD.
Press the CD OPEN button. The CD compart-
ment opens.
Place the disc with the label facing up on the
turntable.
(Place only one disc at a time.)
Press the CD compartment
to close it
The
total' number
of tracks
on the
disc
appears.
Press the PLAY/PAUSE
button.
co
PLAY
0
REPEAT
O MEMORV
m /
~
The CD PLAY indicator lights and the current
track number
appears.
Play starts from the
first track,
To start play from the desired
track, se-
lect the track by using the SKIP/SEARCH
buttons,
then
press
the
PLAY/PAUSE
button.
Note:
If a disc is loaded upside down, or if no disc
is loaded,
"00" appears
and the CD player
will not operate.
6.
Press the STOP/CLEAR
button to end disc
play.
When
the last track
has been played,
the
player stops automatically.
7.
To turn the CD player off, set the FUNCTION
switch to TAPE/OFF.
Note:
Do not open the CD compartment
during
CD
play. Always press the STOP/ CLEAR button and
wait for the disc to stop rotating before opening
the CD compartment.
Notes on handling
compact
discs
Do not expose
the disc to direct
sunlight,
high humidity
or high temperatures
for ex-
tended periods of time.
Discs should be returned to their cases after
use.
-
Do not apply paper or write anything on the
disc surface,
Handle the disc by its edge. Do not touch the
playing surface (glossy side).
Fingerprints
and dust should
be carefully
wiped off the playing surface of the disc with
a soft cloth.
Wipe in a straight motion from the centre to
the outside of the disc.
Never use chemicals
such as record cleaning
sprays, antistatic sprays or fluids, benzene or
thinner to clean compact
discs.
Temporarily
stopping
play
Press the PLAY/PAUSE
button, The CD PLAY in-
dicator blinks. To resume play, press the button
again.
Skip play
To skip to track 6 while track 3 is playing, press
the FM
SKIP/ SEARCH
button repeatedly
until "
6 " appears
on the display. To skip back to track
3 while track 6 is playing,
press the M<
SKIP/
SEARCH
button repeatedly
until " 3 " appears.
Search
(forward/reverse)
If the FM
or 14<
SKIP/SEARCH
button
is
pressed during play, the player will search at high
speed
in the forward
or reverse
direction
while
the button is being pressed.
When the button is
released,
normal play will continue.
6

Advertisement

Table of Contents
loading

  Also See for Sanyo MCD-S900F

  Related Manuals for Sanyo MCD-S900F