Table of Contents
Advertisement
Setup personal data. (Page 14)
USER
SET
Setup tire circumference (L), enable auto lap counting and setup single
SYSTEM
lap distance, enable backlight, setup date/ time, and change language.
SET
(Page 12-13)
View total exercise amount including accumulated exercise time,
EXERCISE
distance and energy burnt. (Page 22)
STAT.
2 Pairing with Sensor
2-1 Pair with Your HRM
1.
In standby mode, press to point to PAIRING SENSOR, press to enter.
2.
In the PAIRING HRM window, press to create Bluetooth connection and start pairing.
3.
Paired successfully, message OK prompts, press to exit. Pairing failed, message NO-DEV prompts, press to exit to PAIRING HRM and starts
from STEP 2 again.
Please refer to the Heart Rate Strap manual on wearing it properly, or press and hold the metal button at the back of the heart rate sensor (HRM) with both hands until the "OK"
message prompts in your Cycling Computer.
Make sure HRM is set to ON in the Sensor Setup window. (Page 15)
Keep your heart rate sensor and Cycling Computer within 10cm from each other. Keep both away from other Bluetooth devices to prevent incorrect pairing.
Advertisement
Table of Contents
