Synchronize With Smartphone - velomann VDOUBLE 10 User Manual

8-4 Synchronize with Smartphone

STEP 1 Open ALA COACH+ App>Settings>My Sensors>Cycling Computer >Cycling Computer User Setting.
STEP 2 Setup in sequence.
STEP 3 Open ALA COACH+ App>Settings>My Sensors>Cycling Computer >User Setting Sync. >SMART CYCLING.
STEP 4 Synchronization steps:
1. When Cycling Computer is in standby mode, press to point to PHONE SYNC., press to create Bluetooth connection, after
connected, press the App Start button.
2. Once Sync. is completed, the App prompts OK, press the App upper left button to exit the mobile device, and Key to exit your
Cycling Computer.
Sync. completed, click to exit.
•Precautions on connecting smartphone for Synchronizing with Smartphone:
1.Check the mobile device>Settings>Bluetooth
2.Make sure your smartphone or mobile device has been paired with your Cycling Computer otherwise, please pair the two in advance. (Page 24)
3.Keep your mobile device and Cycling Computer within 10cm from each other and keep both away from other Bluetooth devices during synchronization.
system and ALA COACH+ App>Settings>My Sensors>Cycling Computer is ON.
®
Inspection is ON
Synchronize to the system settings SYSTEM SET
Synchronize to the training Targets TARGET SET
Synchronize to the system settings SYSTEM SET
Synchronize to the user settings USER SET
Synchronize to the sensor settings SENSOR SET