2-3.
OPTICAL PICK-UP BLOCK ASSEMBLY
6 Compression spring (BU)
2-4.
BRACKET (GEAR) ASSEMBLY
3 Stopper washer (5)
4 Gear (MAIN)
5 Screw
(BVTP3 × 8)
6 Rotary encoder
Note : As for the installation of the main gear, refer to "Note for MAIN
GEAR installation" on page 4.
3 Two screws
(PTPWH2.6 × 6)
5 Holder (BU)
1 Stopper washer (5)
2 Screw
(PTPWH3 × 12)
4 Two screws
(PTPWH2.6 × 6)
8 Optical pick-up block assembly
1 Flat type wire (16 core)
7 Compression spring (BU)
2 Gear (REV)
7 Stopper washer (5)
8 Gear (U/D)
9 Five screws
(BVTP3 × 8)
0 Bracket (GEAR)
— 7 —
(BD board, to CN101)
assembly