LG PQWRHSF0 Manual page 9

Installation method:
1 Put the installation paper on the place and determine the position and height of the fixing screws of the wired remote con-
troller.
• Refer to the printed side of the installation paper.
2 Plug the connecting cable into the indoor unit.
• The product is being shipped with the cable connected only to the remote controller. Put each cable to the remote con-
troller according to the color match
remote Controller
3 Remove the installation paper before installing the remote controller so that it can fit into the right place.
* When installing the wired remote controller, do not install it so that it is buried to the wall. (This can cause error in the
temperature sensor)
* When installing multiple wired remote controllers horizontally in one location, leave a minimum distance apart (2cm).
(This can cause error in the temperature sensor)
* Do not install the cable with a distance of 50 m or longer. (This can cause communication error.)
* When installing the cable, check whether the connector between the remote controller and the product is installed prop-
erly. The connector will not be connected when installed in opposite sides.
J Supply the power after connecting wired remote controller.
When you need to change wired remote controller, switch off the main power and change it Before switch off the main
power if changed the wired remote controller , you can't use the option function of the indoor unit.
Controller accessories
The position of the fixing screws
Side of Side of
Indoor Unit
Fixing the
remote controller
Be careful not to alter the colors
of the remote controller
connection cables.
Main frame
Red Yellow Yellow Yellow Brown
Fixing the
connecting cable
Deluxe wired remote controller
371