Installation Procedure; Mounting On The Wall; How To Insert Batteries - LG PQWRHSF0 Manual

Wireless remote controller

Installation procedure:

Mounting on the wall

1) Mount the remote control stand on the wall with the help of screw driver and screw pur-
chased locally.
2) Insert the remote control in the stand.

How to insert batteries:

1) Remove the battery cover from the remote control. Slide the cover in the direction of arrow.
2) Insert two batteries. Take care about the polarity(+/-) and batteries should be new.
3) Re-place the cover by sliding it back into position.
How to use
For ceiling cassette :
Point the signal transmitter towards the front panel of the cassette indoor unit (for C, D, E, F
Chassis models) and press any function key. For B chassis point the signal transmitter towards
the wired remote control and press any function key.
For ceiling concealed duct, ducted split & Single package :
Point the signal transmitter towards the wired remote control and press any function key.
Remarks
1. Do not use rechargeable batteries for wireless remote control .
2. Remove the batteries from the remote control if the air conditioner is not going to be used for
long time.
364 Controller accessories