Machine Documentation; Check Fluid Levels; Initial Startup Preparation - Boss 210 DUS JD4045 Service And Maintenance Manual

6.7 Machine Documentation

Record serial numbers for main components in the system.
I. Machine Serial Number
II. Compressor Airend Serial Number
III. Engine Serial Number
IV. Separator Tank Serial Number

6.8 Check Fluid Levels

The machine is factory filled prior to shipment. The proper fluid levels are also listed in the maintenance
section.
I. Separator Tank Oil Level = Halfway on the separator tank sightglass.
II. Engine Radiator Coolant Level = Bottom of the radiator fill neck.
III. Engine Coolant Recovery Bottle = Fill to the cold line.
IV. Engine Crankcase Oil Level = Full on the dipstick.

6.9 Initial Startup Preparation

I. Reconnect battery terminals. Ensure the red cable is connected to the battery's positive terminal,
and the black cable is connected to the battery's negative terminal.
II. Check the system for fuel, oil, and/or coolant leaks.
HOURMETER
VOLTMETER
Installation
__________________________________________
__________________________________________
__________________________________________
__________________________________________
OIL PRESSURE
COOLANT
TEMPERATURE
BYPASS SWITCH
COMPRESSOR
TEMPERATURE
IGNITION
SWITCH
21
AIR PRESSURE
EMERGENCY
STOP SWITCH
309416
01/31/2012