Advertisement
Optional Accessories and
Replacement Parts
7.6 m (25 ft.) Cable (XLR-XLR)
5/8" to 3/8" Thread Adapter
Vinyl zippered storage bag
Drum Microphone Mount
Grille
PGA57 Replacement Grille
4.6 m (15 ft.) Cable (XLR-XLR)
Wireless Microphone Clip
Popper Stopper® Pop Filter with Metal
Gooseneck and Microphone Stand Clamp
Foam Windscreen for all larger Shure "ball-
type" Microphones available in black, blue,
gray, green, red and yellow
Microphone Clip for SM58, SM57, SM87A,
Beta 87A, Beta 87C, PGA57, PGA58, PGA48,
PGA81
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.
shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: info@shure.de
6
Specifications
PGA52
C25J
Type
Dynamic (moving coil)
31A1856
Frequency Response
95B2324
50 to 12,000 Hz
AP56DM
Polar Pattern
RPMP52G
Cardioid
Output Impedance
RPMP57G
150 Ω
95D2153
Sensitivity
WA371
at 1 kHz, open circuit voltage
PS-6
-55 dBV/Pa¹ (1.75 mV)
Polarity
A58WS
Positive pressure on diaphragm produces positive voltage on pin 2 with
respect to pin 3
Weight
A25D
454 g (16.01oz.)
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
1 Pa=94 dB SPL
Operating Temperature
-20° to 165°F (-29° to 74°C)
Relative Humidity
0 to 95%
10 cm (4 in.)
60 cm (2 ft.)
Typical Frequency Response
1000 Hz
Typical Polar Pattern
Advertisement
