Table of Contents
Advertisement
Quick Links
Thank you for buying this Inland product. The DFS-100 ReefKeeper saw is designed for fragging corals. You will find it works well with
both large polyp and small polyp stony corals, zooanthids, mushrooms, soft corals and live rock too. You will find that the blade tends to
slice through soft tissue rather than crushing it like scissors, nippers, and shears, thus aiding in the recovery process. Please read all the
instructions for set up and use of your DFS-100.
•
It is extremely important to wear proper eye protection and rubber gloves as some corals, especially zooanthids, are toxic! We
highly recommend that you wear safety goggles rather than safety glasses.
•
DO NOT wear loose clothing or any accessories (long necklaces, bracelets, shirts with long fringes, and similar) that might get caught
by the saw during operation.
•
Use only in a properly grounded and tested outlet. Under NO circumstances should you override the grounding system or modify the plug.
•
Set up your machine on a sturdy, level work surface that is water tolerant and at a comfortable height.
Check to make sure that you have all the parts listed before beginning assembly. Assembly will take about 5 minutes and only requires a
Phillips screwdriver. Use the exploded drawing below to reference parts and their placement during the assembly process.
DFS-100 ReefKeeper™ Saw
User Guide
Parts and Assembly
Safety
Page 1
Qty-Part No. / Part Name
1-90007
DiamondCut™ Blade
1-65829119
Band Saw Drain Hose
1-65809114
Coolant Reservoir
1-65809118
Coolant Reservoir Cover
1-65829184
Band Saw Coolant Tubing
4-65829173
10-24 x 1/2" Nylon Screw
1-90033
Molded Work Table
2-90022
BladeSert™
1-90016
Blade Drip Guide
1-78824055
5/64" Long Arm Allen Wrench
3-65829114
10-24 3/4" Nylon Thumb Screw
1-90014
Leather Blade Wiper
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Inland DFS-100 ReefKeeper
Summary of Contents for Inland DFS-100 ReefKeeper
- Page 1 User Guide Thank you for buying this Inland product. The DFS-100 ReefKeeper saw is designed for fragging corals. You will find it works well with both large polyp and small polyp stony corals, zooanthids, mushrooms, soft corals and live rock too. You will find that the blade tends to slice through soft tissue rather than crushing it like scissors, nippers, and shears, thus aiding in the recovery process.
-
Page 2: Installing The Blade
Proper blade tension is important for cutting ease and obtaining maximum blade life. The tension springs lessen the stress that twists and pulls put on the blade to maximize blade life. All Inland saws have tension springs preset for a blade 37.7" in circumference (+ or - .005") - the exact dimension of Inland brand blades. - Page 3 IMPORTANT NOTE: The BladeSert will wear with saw use and the slot that the blade passes through will widen over time. How fast this happens depends on use and your sawing style. Using a worn BladeSert allows for excess play in the blade and the blade becomes more likely to break.
-
Page 4: Replacement Parts
INLAND CRAFT PRODUCTS, CO. for 90 days from the original date of purchase. If your Inland machine fails under appropriate use during the warranty period, Inland Craft will repair or replace it at our discretion. If you feel that this product is not performing properly and needs to be serviced, contact INLAND CRAFT help desk for a Return Authorization Number.
Need help?
Do you have a question about the DFS-100 ReefKeeper and is the answer not in the manual?
Questions and answers