Inland SwapTop 10630 User Manual

Maintenance
• Always unplug the unit when cleaning.
• We recommend after wet use to drain any remaining coolant: The debris from
many materials has a tendency to harden. Rinse and dry the reservoir and re-
movable work surface.
• After dry use empty or vacuum the reservoir of debris and then wipe down and
dry the reservoir and removable work surface.
• Never allow the yellow motor unit to get wet or immerse it in water. Use a
vacuum to remove any debris from the bottom air vents on the unit.
• Always secure blades to the fl at side of the motor shaft. You can use a thin coat-
ing of Inland MotorShaft Lubricant™ (Inland no. 50028) or petroleum jelly to help
keep the arbor from seizing on the shaft.
• Check the power cord periodically for cuts or damage.
• Check all coolant lines and tubes to see that they are not clogged.
Product Specifi cations
Convertible Motor Unit
Variable Speed Motor Unit
Permanent Magnet DC motor, rectifi ed for AC outlets
Max Torque: 48 oz-in
Max RPM: 2800
Shaft OD: .312" (5/16") Stainless Steel
Available in 115V or 230/240V models
Two Year Full Confi dence Warranty
Parts and Accessories
40960 6 ½" x .020" Trim Saw Blade - Standard: A great all-around diamond blade
for cutting hard materials.
40961 6 ½" x .012" Trim Saw Blade - ThinCut™: A little thinner diamond blade
that cuts a little faster and consume a little less material, but also a bit less durable.
40968 6 ½" x .008" Trim Saw Blade - Extra ThinCut™: Our thinnest diamond
blade for use on precious materials when waste in cutting needs to be minimized.
90960 MetalCut™ 6 ½" Trim Saw Blade: Toothed blade for cutting soft, nonferrous,
metals such as copper, brass, or silver, and some plastics. 24 TPI (teeth per inch).
90964 WoodCut™ 6 ½" Trim Saw Blade: Toothed blade for cutting wood and some
plastics. 10 TPI (teeth per inch).
69801661 Rip Fence Kit: Use to saw uniform width strips and pieces.
10885 8" Flat Lap Conversion Kit: Convert any SwapTop Table Saw into a fl at lap
machine for shaping and polishing. Includes 4 graduated grit diamond laps, master
lap, polishing pad, and compound.
10655 Grinder / Shaper Conversion Kit: Converts any SwapTop Table Saw into a
diamond grinder / shaper.
For questions or comments regarding the use of this or any Inland product, visit
our website at www.inlandcraft.com; email us at helpdesk@inlandcraft.com; call
Inland Customer Service at 1-800-521-8428 from 9 AM to 5 PM EST or write:
Inland Craft Products, Co.
32052 Edward Drive
Madison Heights, MI 48071
Rev No. 7
Table Saw
Height: 6 ½"
Blade Diameter: 6 ½"
Work Surface: 12" x 9 3/4"
Maximum Cutting Thickness: 1"
Service
Stock No. 69861060
SwapTop™ Table Saws
Thank you for buying this Inland product. These instructions cover assembly
and use of the SwapTop™ Table Saw (models 10630, 10660, 10670) and the Swap-
Top™ Table Saw Conversion Kit (models 10665, 10675). Please read all the instruc-
tions to understand the correct components, set-up, and use of your machine.

Always wear safety glasses or goggles. You can use a FaceShield™ or Mag-
naShield™ for additional protection.

Plug into a grounded electrical system. Do Not override the grounding system.

If your motor unit has a speed control feature, make sure that you set it at the
maximum speed for proper operation.

Always unplug your machine when switching between set-ups, installing blades,
and making adjustments.

Place on a sturdy, level, water tolerant surface at a comfortable working height.

Never operate with guard covers and safety features removed or disabled.
Use the chart and picture to verify you have the parts needed for your model
Name Qty 10630
A Machine Base 1
B Motor Unit 1
C Removable Work Surface 1
D Blade Arbor & Nut 1
E Blade Arbor Wrench 1
F Protractor 1
G Blade Guard 1
I 5/64" Allen Wrench 2
J Plastic Drain Tube 1
6 ½" Saw Blade 1 WoodCut MetalCut MetalCut Diamond Diamond
WaterDrip Kit 1
(not shown)
Users Guide
Safety
Parts List
10660 10665 10670
yes yes no yes
yes yes no yes
yes yes yes yes
yes yes yes yes
yes yes yes yes
yes yes yes yes
yes yes yes yes
yes yes yes yes
yes yes yes yes
- - - yes
10675
no
no
yes
yes
yes
yes
yes
yes
yes
yes