Adjusting The Seat Depth - Permobil vs Service Manual

Initial adjustments

Adjusting the seat depth

The seat depth can be adjusted to fit different
users. On Senior seats depth can be adjusted
between 18"-22". Where greater seat depth is
required, a seat extender can be fitted, allowing
for adjustments of up to 24". On Junior seats
depth can be adjusted between 16"-20".
Adjustment of seat depth is performed by moving
the back rest in 1" steps. To set the seat depth,
see pages 7-8. To mount the seat extender, see
below.
WARNING
When adjusting the seat depth, follow the instructions
on pages 7-8 exactly. A faulty adjustment could cause
serious damage to the seat.
Installing the seat extender.
Mounting a seat extender on a Senior seat allows
the depth to be increased by a further 2". The seat
depth can then be adjusted from 18" to 24".
1. Remove the two plastic covers in the seat
frame ends, left and right, see photo above.
2. Mount the seat extender by inserting it in the
back edge of the seat frame, see photo on
right.
3. Screw the extender into place using the two
screws supplied – see photo on right.
NOTE
If seat extender is mounted, the seat bracket has to
be remounted in the correct position, see fig.
Remove the plastic cover from the end of the seat
Insert the seat extender into the rear edge of the
seat frame and mount it with two screws
from below.
1
2
Seat without seat extender is mounted in the front
hole pattern(2). When extender is mounted the seat
bracket has to be moved to the rear hole pattern(1).
8
frame.
1
2