Table of Contents
Advertisement
Initial adjustments
Adjustment of arm rest
Height/angle
1.
Release the two nuts on the inside of the arm rest,
see photo on right.
2.
Adjust the arm rest for height and angle.3.
Tighten the two nuts.
Adjustment of chest support
Depth
1.
Unscrew the two nuts on the inside of the arm rest,
see photo.
2.
Move the fixing on the chest support until it reaches
a suitable depth. The depth can be adjusted at
intervals of 1".
3.
Secure the fixing with the two nuts without
tightening them.
4.
Adjust the height and angle of the arm rest and
tighten the two nuts.
Height
1.
Release the Allen screws (1) on the locking ring on
either side of the chest support, see photo.
2.
Adjust the chest support to a suitable height, but
never so high that the fixing is not visible at the
lower edge of the sleeve (2), see photo.
3.
Tighten the Allen screws on the locking ring
WARNING
Never adjust the height so far that the chest support
fixing is not visible at the lower edge of the sleeve.
Adjustment of arm rest and chest support.
Adjustment of chest support.
16
1
2
Advertisement
Table of Contents
