Permobil vs Service Manual page 27

Repairs
3. Remove the crush protection switch, mounted
with its accompanying nut and washer, see
photo.
4. Remove the cable from the crush protection
switch. Note the cable's position for use in
remounting.
Installation
Mount in reverse order.
The crush protection cover mounting at the rear
edge, with screw, washer, spacer and spring, can be
seen on the photo at the bottom of page 26.
Check the crush protections function after mounting.
The crush protection switch is mounted with its
Adjust the witch to correct height.
Crush protection switch
27
accompanying nut and washer.
Repairs
22mm.