Knee Support - Permobil vs Service Manual

Initial adjustments
Adjustment of knee support
Angle of knee support strap
Adjust the angle of the knee support strap in
order to provide as smooth a fit as possible
when using the elevation function. Adjust the
roller so the angle of the strap with the
horizontal is equally large downwards in the
sitting position as it is upwards in the standing
position.
1. Check and visually compare the angle of the
tape with the horizontal for standing and
sitting positions.
2. If the angle of the strap needs adjusting,
release the fixing on the roller, mounted with
four screws, see photo on right.
3. The roller fixing can be moved 5 steps at 20
mm intervals. If the strap angle is too great in
the sitting position, move the roller upwards. If
the strap angle is too great in the standing
position, move the roller down.
4. Mount the roller fixing in a suitable position
and replace the four screws, see photo.
5. Check and visually compare the angle of the
strap with the horizontal for standing and
sitting positions.
Angle of knee support strap in sitting position.
Angle of knee support strap in standing position.
The roller is mounted with four screws and can be
moved in 5 steps at 20 mm intervals.
14