Sony HCD-RG66 Service Manual page 15

QQ
3 7 63 1515 0
[Version and Destination Display Mode]
• The version or destination is displayed.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. To enter the test mode, press the three buttons x , GAME EQ
and MOVIE EQ simultaneously.
3. The destination is displayed.
4. Press the x and ENTER buttons simultaneously.
5. The version is displayed.
6. To exit from this mode, press the ?/1 button to turn the set
OFF.
[CD Service Mode]
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the pick-up.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Select the function "CD".
3. To enter the test mode, press three buttons x , GAME EQ ,
and OPEN/CLOSE simultaneously.
4. The message "CD S" is displayed. The CD service mode is
selected.
5. With the CD in stop status, press the
pick-up to outside track and "CD S -F" is displayed, or press
the – button to inside track and "CD S -R" is displayed.
m
6. To exit from this mode, perform as follows:
1) Move the pick-up to the most inside track.
2) Perform Cold Reset.
Note: • Always move the pick-up to most inside track when exiting from
TE
L 13942296513
this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can be
chipped.
[MC Test Mode]
• This mode is used to test the function of the equalizer.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. To enter the test mode, press the three buttons x , GAME EQ
and DISC 3 simultaneously.
3. Press the MOVIE EQ button.
The function of the equalizer is set to "GEQ MIN".
4. Press the MUSIC EQ button.
The function of the equalizer is set to "GEQ MAX".
5. Press the P FILE button.
The function of the equalizer is set to "GEQ FLAT".
6. To exit from this mode, press the ?/1 button to turn the set
OFF.
[CD Ship Mode (No Memory Clear) ]
• This mode moves the pick-up to the position durable to vibra-
tion. Use this mode when returning the set to the customer after
repair.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Select the function "CD".
www
3. Press the ?/1 button to turn the set OFF.
4. Press the CD button and ?/1 button simultaneously.
5. The "STANDBY" display blinks instantaneously, then "LOCK"
is displayed and the CD ship mode is set.
.
http://www.xiaoyu163.com
+ button to move the
M
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
HCD-RG66
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9
15