Page 2
Indicator with battery operation with wall and stand bracket APPLICATION APPLICATION APPLICATION APPLICATION The Soehnle Professional 2750 displays are designed for weighing patients. These displays are intended for environments subject to calibration regulations. They comply with EC Directives 2004/108/EC, 2006/95/EC, 2009/23/EC, 2007/47/EC and 93/42/EEC. SAFTY NOTICES SAFTY NOTICES...
Page 3
MAINTENANCE MAINTENANCE MAINTENANCE A metrological check has been performed by the manufacturer. Recalibration must be carried out in accordance with national regulations. Repairs must only be carried out by a Soehnle Professional authorized centre using original parts. NOTE NOTE NOTE NOTE In accordance with European directive 2004/108/EC this device is fitted with noise suppression.
Page 4
!Getting started 2750: Please load the battery at least for 5 hours, before using the display !Getting started 2750: Please load the battery at least for 5 hours, before using the display for !Getting started 2750: Please load the battery at least for 5 hours, before using the display...
Page 5
> 2750 > 2750 Indicator with battery operation Indicator with battery operation: : : : The scales automatically switch off after approx. 60 > 2750 > 2750 Indicator with battery operation Indicator with battery operation seconds and switches into standby-mode. By using the on-/off-button on the rear of the indicator the scales is activated again.
Page 6
5 hours, before using the display at least for 5 hours, before using the display for at least for 5 hours, before using the display for the first time! the first time! the first time! the first time! www.soehnle-professional.com...
Need help?
Do you have a question about the 2750 and is the answer not in the manual?
Questions and answers