Selecting The Hd-Sd Conversion Mode - Sony SRW-5800 Operation Manual

To adjust the audio playback level
manually
Press the PB LEVEL button to enter PB LEVEL
adjustment mode. Then, make active of the channel that
you want to adjust the playback level manually, and then
adjust to the desired volume with the MULTI CONTROL
knob or cursor R and r buttons. When you press the PB
LEVEL button again to exit the PB LEVEL adjustment
mode, the vertical white line on the right of the audio level
meter and a horizontal white line indicating the setting are
displayed, indicating that the playback level is subject to
manual adjustment.
Select the channel for PB LEVEL
PB LEVEL button adjustment.
You can also carry out the playing level adjustment using
the VTR SETUP menu item 833 "AUDIO PB LEVEL".
5-3-3 Selecting the HD-SD
Conversion Mode
Select the conversion mode using the VTR SETUP menu
item 930 "DOWNCONVERTER MODE".
• Edge crop mode (CROP)
1/4 of the HDVS image on each side is cut off.
Horizontal adjustment of the edge cropping
Use the VTR SETUP menu item 932 "H CROP
POSITION (DC)".
• Letter box mode (LETTER BOX)
When the letter box mode is selected, you can select one of
the following three conversion methods using the VTR
SETUP menu item 931 "LETTER BOX MODE (DC)".
108
5-3 Preparing for Playback
When 16:9 is selected
The signal is compressed, maintaining an aspect ratio of 16:9.
When 14:9 is selected
The sides of the HDVS image are cut and the signal is
compressed, changing the aspect ratio to 14:9.
When 13:9 is selected
The sides of the HDVS image are cut and the signal is
compressed, changing the aspect ratio to 13:9.
• Squeeze mode (SQUEEZE)
The 16:9 signal is compressed, changing the aspect ratio to 13:9.