Recalling Vtr Setup Data For The Srw-5000/5500 To The Vtr Memory Bank - Sony SRW-5800 Operation Manual

The ALT + SETUP menu appears.
4
Press the [F2] (DEFAULT MEMORY CARD) button.
The DEFAULT MEMORY CARD menu appears.
The procedure for saving from CARD DEFAULT to
DEFAULT BANK or CURRENT DEFAULT, saving
from DEFAULT BANK, CURRENT DEFAULT or
FACTORY PRESET to CARD DEFAULT, changing
the title, or setting protection, is the same as operation
on a VTR bank.
For details, see "4-1-5 "Memory Stick" Operations"
on page 44.
Notes
• The storage region for CARD DEFAULT is one set
only.
• The title shown in the current area is always that for
the CURRENT SETUP data. When CARD
DEFAULT data with the title changed is written to
CURRENT DEFAULT, the title of the current area
does not change. Also, when CURRENT
DEFAULT settings are saved in CARD DEFAULT,
the title of CARD DEFAULT is copied from the title
of CURRENT SETUP.
• There is no data compatibility between the SRW-
5800 and SRW-5000/5500.
On how to check the items for which DEFAULT values
have been changed from FACTORY PRESET values,
see "To check the items for which DEFAULT values
have been changed" on page 101.
4-1-12 Recalling VTR SETUP Data for
the SRW-5000/5500 to the VTR
Memory Bank
VTR SETUP data for the SRW-5000/5500 that have been
stored on a "Memory Stick" can be recalled to the current
VTR memory bank.
1
Press the SET UP button.
The SET UP menu appears.
52
4-1 Registering and Storing Menu Settings
2
Press the ALT button.
The ALT + SETUP menu appears.
3
Press the [F4] (IMPORT DATA) button.
The IMPORT DATA menu appears.
4
Press the [F1] (SRW-5000/5500) button.
The MC5000/5500 menu appears.
5
Press the cursor T button to move the cursor (B) to
the side of SRW-5000/5500, and then press the cursor
R or r button to move the cursor to the number of the
memory bank on the "Memory Stick".
Note
The yellow items ("Unchanged Items") in the menu
are included only in the VTR SETUP data for the
SRW-5800. These items do not change even when the
VTR SETUP data for the SRW-5000/5500 are recalled
in step 7 below.
6
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
7
Press the [F9] (COPY) button while holding down the
SFT button.
The VTR recalls the VTR SETUP data for the SRW-
5000/5500.
After the recalling process has completed, the title
under the SRW-5000/5500 indication appears under
the SRW-5800 indication.
To restore the VTR bank to its condition prior to
the recall
Press the [F2] (UNDO) button.
8
Press the [F10] (EXIT) button.
The IMPORT DATA menu appears again.