Changing Settings - Sony SRW-5800 Operation Manual

Scrolling items in the VTR SETUP menu
Press the R and r buttons to scroll the items in the VTR
SETUP menu.
To search the menu by category
Items in the VTR SETUP menu are divided into categories
according to type of settings they perform.
Menu number Category
Nos. 001 to ... Items related to VTR operations
Nos. 101 to ... Items related to operation panels
Nos. 201 to ... Items related to remote interface
Nos. 301 to ... Items related to editing
Nos. 401 to ... Items related to prerolling
Nos. 501 to ... Items related to recording protection
Nos. 601 to ... Items related to the time code
Nos. 701 to ... Items related to the video control
Nos. 801 to ... Items related to the audio control
Nos. 901 to ... Items related to digital process
Nos. A01 to ... Items related to pulldown control
Nos. T01 to ... Other
To change the menu display
Press any of the following buttons, to change the menu
display.
[F5] (CATEGORY) button: Display the menus by
category
[F6] (NAME) button: Display all menus in alphabetical
order
[F7] (SCROLL) button: Display all menus in numerical
order

Changing settings

1
Press one of the [F5] (CATEGORY), [F6] (NAME),
and [F7] (SCROLL) buttons.
This changes the menu display.
100
4-7 SET UP Menu
To change the category
Do one of the following:
• Press the T button to make the categories window
active, and select the category with the R and r
buttons.
• Press the t button to make the item window active,
and press the [F1] (PREV PAGE) or [F2] (NEXT
PAGE) button.
2
Press the t button to make the item window active,
then use the cursor R and r button, or the MULTI
CONTROL knob, to align the cursor with the item to
be changed.
To speed up cursor movement
Hold down the SFT button, and press the cursor R and
r button.
3
Press the [F8] (CHANGE DATA) button or the cursor
t button.
A window for changing the setting value appears.
4
With the [F8] (CHANGE DATA) button, or the cursor
R and r button, or the MULTI CONTROL knob, select
the setting value.
When subitems are displayed, use the cursor R and r
button, or the MULTI CONTROL knob to select the
subitem to be changed, then press the [F8] (CHANGE
DATA) button repeatedly.
To return to the DEFAULT values, press the center
cursor button or the MULTI CONTROL knob.
5
Press the [F10] (SAVE/EXIT) button or the cursor T
button.
This saves the change, and closes the window.
About the unit's behavior when the MULTI
CONTROL knob is pressed
You can set item 132 "KNOB MODE" in the VTR
SETUP menu to "move window" to select moving
between windows as the action when the knob is
pressed.