Bosch PCM 10 Operating Instructions Manual page 32

PCM10_WEU.book Seite 3 Donnerstag, 1. Dezember 2005 9:16 09
Always use saw blades of the correct size and
with matching mounting holes (e. g., star form or
round).
Do not use saw blades of high alloy steel (HSS
steel).
Do not take hold of the saw blade after working
before it has cooled.
Never use the power tool without the table insert.
Replace a defective table insert.
Important notice:
Symbol Name
∅
Do not direct the laser beam at persons or ani
mals and do not look into the laser beam, also
not from greater distances.
Do not allow children to use the power tool with
laser without supervision.
Do not replace the built in laser with a laser of
another type.
SYMBOLS
Meaning
English–3