Page 1
® Indoor Touch User guide Firmware 1.3.0 Version www.2n.cz ...
Page 2
Declaration of Conformity see the CD-ROM (if enclosed) or our website at www.2n.cz. The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All development, production and distribution processes of the company are managed by this standard and guarantee a high quality, technical level and professional aspect of all our products.
1. Product Overview In this section, we introduce the ® Indoor Touch product , outline its application options and highlight the advantages following from its use. The section also includes safety precautions. Here is what you can find in this section: 1.1 Product Description...
1.1 Product Description ® Based on the Android OS, Indoor Touch helps load third party applications to a device (if enabled so in the device configuration), thus improving its flexibility. It contains a 7" colour LCD display with a capacitive touch layer, loudspeaker, microphone and Ethernet and WiFi interfaces (depending on the Part No.) for LAN...
1.2 Differences between Models ® This manual is valid for all the Indoor Touch types. Therefore, please note that several features described in this document are only available in selected models or need to be activated with a licence key. If a feature is not available in all the models, a note is added to the respective subsection.
Useful information for quick and efficient functionality. Note Routines or advice for efficient use of the device. Future Functions, New Features grey-marked text in this document designates the functions and features that are under preparation or development at present. ® TELEKOMUNIKACE a.s., www.2n.cz...
Ethernet cable can only be carried to the required site. ® Although Indoor Touch is not intended for cars or aeroplanes, all ® prohibitions and regulations relating to adapter equipped devices apply to 2N Indoor Touch too. ® TELEKOMUNIKACE a.s., www.2n.cz...
2. Description and Installation ® This section describes the Indoor Touch installation and correct connection. Here is what you can find in this section: 2.1 Before You Start 2.2 Brief Installation Guide 2.3 Installation Conditions 2.4 Status LED 2.5 First Startup The device is designed solely for wall mounting.
Place the device carefully from top to bottom with its bottom part slightly away (up to 5 cm) from the wall. When the device fits to the main holder supports, push the device bottom part onto the wall. Tighten the safety screws on both the device sides. ® TELEKOMUNIKACE a.s., www.2n.cz...
(perpendicular to the ® floor) in the height of up to 120 cm above the floor. If necessary, operate 2N Indoor Touch in a position other than as aforementioned for a short time only, for quick testing purposes in a servicing centre, for example.
Page 14
A defective Ethernet cable may lead to a high packet loss in the Ethernet and subsequent instability and poor video call quality! Warning Connection of a defective or improper power adapter may lead to a ® temporary or permanent failure of the 2N Indoor Touch unit! Licence Limitations ®...
Device state is displayed Standard Operation: Colour State No light Device state is displayed White is Stand-by mode (display off) ® Other Notification of other states of applications running in the system states Helios IP Mobile , e.g.). ® TELEKOMUNIKACE a.s., www.2n.cz...
Change the access password while configuring the device for the first time to avoid unauthorised access to configuration! System Licence ® Indoor Touch has a factory licence key, which can be time-limited (depending on the Part No.). The licence expiry may cause a partial limitation of the device functionality! Refer to 3.3 Launcher Configuration...
3. 2N® Indoor Touch Configuration ® This section describes the Indoor Touch configuration. Here is what you can find in this section: 3.1 Factory Reset 3.2 Introductory Screen 3.3 Launcher Configuration 3.4. Device Upgrade ® TELEKOMUNIKACE a.s., www.2n.cz...
3.1 Factory Reset ® Follow the steps below to reset the Indoor Touch factory values: Push the Factory reset button in the Launcher Configuration menu. Refer to Launcher Configuration Press and hold the Reset button on the device backside: Remove the device from the installation holder.
Back icon – helps you return one level higher or one step back (depending on the application type). Home icon – helps you return to the introductory screen. Squares icon – helps you switch the currently launched applications. Loudspeaker icons – help you increase/decrease the system loudspeaker volume. ® TELEKOMUNIKACE a.s., www.2n.cz...
Complete the correct access password. Caution The factory access password is "2n“. If you lose the access data, you will have to factory reset the device! Change the password in the Settings – Home screen menu.
Page 21
White LED when display is turned off – the white LED lights up automatically after the LCD display turn-off to indicate the stand-by mode. Enable notifications – enable LED notifications of selected events (missed calls, e.g.) in the stand-by mode. ® TELEKOMUNIKACE a.s., www.2n.cz...
Factory reset – reset the device factory values. Caution We do not recommend you to change the preset device temperature limit to avoid device life impairment or system instability! In case the device keeps exceeding the temperature limit, please check the installation conditions! ® TELEKOMUNIKACE a.s., www.2n.cz...
Get a microSD card of the maximum capacity of 16 GB and with the FAT32 file system. Unpack and save the *.ZIP download into the SD card root directory. ® Insert the SD card in the SD card slot on the left side of 2N Indoor Touch (refer to 2.1 Before You Start...
Helios IP Mobile applicat ion. Here is what you can find in this section: 4.1 Application Description 4.2 Introductory Screen 4.3 Notification in 2N® Indoor Touch Environment 4.4 Application Configuration 4.5 Connection to 2N® Helios IP ® TELEKOMUNIKACE a.s., www.2n.cz...
Helios IP family. Get the application via the Google Play store (Android OS) or Apple store (iOS). This ® application is pre-installed in Indoor Touch and launched automatically upon every startup (depending on the Part No.). ® ® Helios IP Mobile...
Current video image saving Video transmission Call control Door/Lock control Listening-in enable/disable Access to configuration section Click on the Home button in the system to minimise the application. The application will be restored automatically by an incoming call. ® TELEKOMUNIKACE a.s., www.2n.cz...
4.3 Notification in 2N® Indoor Touch Environment ® ® Helios IP Mobile application uses LED notification. The Indoor Touch LED starts flashing red in case: There is an unread incoming call in the application, or ® Indoor Touch is in the stand-by mode.
4.4 Application Configuration ® Helios IP Mobile application is configured separately and requires just one setting: ® Application name - set the application name in the 2N Helios IP Mobile ® configuration section. Set the same name in the Helios IP configuration.
4.5 Connection to 2N® Helios IP ® Change some settings in the Helios IP intercom to be connected to make the ® ® ® Helios IP Mobile Helios IP connection effective. Refer to the Helios User Manual at http://wiki.2n.cz/display/HIP for details.
6. Supplementary Information ® This section provides supplementary information on the Indoor Touch product. Here is what you can find in this section: 6.1 Troubleshooting 6.2 Directives, Laws and Regulation – General Instructions and Cautions ® TELEKOMUNIKACE a.s., www.2n.cz...
6.1 Troubleshooting Trouble: The device always switches off the display before timeout. ® Advice: Check the device temperature. If improperly installed, 2N Indoor Touch automatically turns into the stand-by mode to reduce the device temperature if critical to avoid forced turn-off / reset in extreme cases. The user is notified of this problem by a short display of the notification window.
The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 35
Make sure that the devices to be disposed of are complete. Do not throw battery packs into fire. Battery packs may not be taken into parts or short-circuited either. ® TELEKOMUNIKACE a.s., www.2n.cz...