Table of Contents
Advertisement
Submenu 3.3 Send Memory
Going up from the submenu Clone the submenu SEND MEMORY appears. This menu allows
to copy a particular memory from a unit of LMS 221 / LMS 266 to another, using our processor
as a master meaning that it is going to send the information to the other processor.
3.3. Send Memory
Prepare to SEND
Push to start
Sending Data 25%
Program Name
Push for Menu
NOTE: In the case of data transmission's problems or when the processors are not correctly
connected a screen with the words: Communic. Error will appear.
RAM Audio LMS 266 / LMS 221 Digital Controller – Hardware Manual
Pushing the Enter key, allows choosing the memory
which is going to be sent to another processor.
Here we receive the order to prepare the processor
which is going to receive the information, pressing the
Enter key the process will start. For this, first the LMS
221 / LMS 266 which is going to receive the memory
needs to be waiting in the submenu 3.4 Receive
Memory.
A next screen informs us of the process of cloning,
showing the percentage of information which is being
sent.
When the process has terminated a window with the
program's name appears.
24
Advertisement
Table of Contents
