Table of Contents
Advertisement
Submenu 1.2. Gain
Once we have finished with the Out Delay submenu, if we press the upper key, we will find the
submenu GAIN. It allows to individually defining the input gain for each of the processor's ways.
To be able to move among the submenus, push the Enter key, inserting the gain values for
each way in the following manner:
1.2. Gain
1.2. Gain
Out 2 : 00.0 dB
1.2. Gain
SUB 1 : 00.0 dB
1.2. Gain
SUB 1 : 00.0 dB
1.2. Gain
Out 3 : 00.0 dB
1.2. Gain
Out 4 : 00.0 dB
1.2. Gain
SUB 2 : 00.0 dB
1.2. Gain
RAM Audio LMS 266 / LMS 221 Digital Controller – Hardware Manual
From the main menu push the Enter key, which will
allow us to enter into the submenu where we introduce
the gain in dB for Out 1.
If we push the Enter key again, we will enter into the
Out 2 submenu where we will repeat the process,
continuing this way until all gains are defined.
Once all values have been inserted, we will push the
Enter key again to return to the Gain menu.
The gain values can vary from Mute, 30.0dB to +6db,
in steps of 0.1db.
The processor will indicate for each output, the name
defined by the user with the LMS 221 / LMS 266
Control Software.
16
Advertisement
Table of Contents
