Table of Contents
Advertisement
Submenu 3.2. Clone
Going up from the submenu Prepare Clon, the submenu CLONE appears. This menu allows
the cloning (make an exact copy) using our processor as the master, meaning that this
processor is going to send the information to the other processor.
3.2. Clone
Prepare to CLON
Push to start
Sending Data 25%
Program Name
Push for Menu
NOTE: In the case of data transmission's problems or when the processors are not correctly
connected, a screen with the words: Communic. Error will appear.
RAM Audio LMS 266 / LMS 221 Digital Controller – Hardware Manual
If we press the Enter key on the menu's main screen,
the submenu 3.2. Clone appears.
Here we receive the advice to prepare the processor to
be cloned and to press the Enter key to start the
process.
A next screen informs us of the cloning process,
showing the percentage of information, which is being
sent.
When the process has terminated a window with the
program's name appears.
23
Advertisement
Table of Contents
