Table of Contents
Advertisement
1.- CONFIGURATION
When pressing the Enter key after the welcome menu, the configuration menu is the first menu
you find. It allows the access to diverse configuration submenus. LMS 221 / LMS 266 disposes
of 60 memories in which you can store your configurations. The user can dispose of all
configurations stored on his hard disk's PC, introducing the 60 necessary into the processor.
Submenu 1.1. Out Delay.-
Pressing the Enter key from the Configuration menu we pass to the OUT DELAY submenu,
where we can select the output Delay of each way we have.
1.1. Out Delay
Delay Out 1
0 ms | 0 cm
Delay Out 2
0 ms | 0 cm
Delay SUB 1
0 ms | 0 cm
Delay Out 3
0 ms | 0 cm
Delay Out 4
0 ms | 0 cm
Delay SUB 2
0 ms | 0 cm
1.1. Out Delay
RAM Audio LMS 266 / LMS 221 Digital Controller – Hardware Manual
Pressing the Enter key, from the main menu, we have
access to the submenu in which we will introduce the
Delay value in milliseconds or centimetres for the
output 1.
If we press the Enter key again, we reach the output 2,
in which we repeat the process. Like this we continue
introducing all of the outputs delay
By pressing the Enter key a last time we return to the
Out Delay menu.
The Delay values for the outputs can vary between 0
and 4.84ms (milliseconds), in steps of 0.02ms or
between 0 and 168cm (centimetres).
The processor will indicate for each output, the name
defined by the user through the LMS 221 / LMS 266
Control Software.
15
Advertisement
Table of Contents
