Attaching A 5-Inch Electronic Viewfinder - Sony PMW-320K Operating Instructions Manual

the viewfinder while you are carrying the
camcorder.
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
Viewfinder slide assembly
3
Attach the BKW-401 with the supplied
bolts.

Attaching a 5-inch Electronic Viewfinder

You can attach an optional DXF-51or DXF-C50W (5-inch) Electronic Viewfinder. To attach it, an
Accessory Shoe Kit (service part number: A-8274-968-B) is required.
For details, consult a Sony service representative.
Note
It is not possible to use the supplied viewfinder and a 5-inch viewfinder at the same time.
Remove the cover of the grip, and attach the shoe and stopper screw of the Accessory Shoe Kit.
4
Adjust the front-to-back position so
that the arm of the BKW-401 does not
touch the handle when it is raised.
Bolts with
hexagonal
hole
Bolts supplied with the BKW-401
Adjust position so that arm
does not touch handle
Attaching the Viewfinder
39