Sony PMW-320K Operating Instructions Manual page 102

OPERATION
Menu items
Input/Output
Makes settings related
to I/O signals.
Super Impose
Makes settings related
to superimposed text
and markers.
102
Menu List
Sub-item Settings
Down Converter Crop/Letter/Squeeze
Wide ID Through/Auto
Super(VF Display) On/Off
Super(Menu) On/Off
Super(Timecode) On/Off
Super(Marker) On/Off
Super(Rec Status On/Off
Indicator)
Description
Selects the signal conversion mode
for output of SD signals.
Crop: Crop the edges of the 16:9
picture and output as a 4:3
picture.
Letter: Mask the top and bottom of
the 4:3 picture and display in
the center of the screen as a
16:9 picture.
Squeeze: Squeeze the 16:9 picture
horizontally and output as a 4:3
picture.
Selects whether to add a wide ID
signal to the SD output signal.
Through: Output without adding a
wide ID signal.
Auto: Add and output a wide ID
signal when the Down
Converter setting is Squeeze.
When the setting of Input/Output
>SDI/HDMI Out Super or Video
Out Super is On, superimpose text
information on the output from the
HD/SD SDI OUT connector, HDMI
connector, and VIDEO OUT
connector, as specified (On or Off)
for each item.
When the setting of Input/Output
>Video Out Super is On, specifies
whether to superimpose markers on
the output from the VIDEO OUT
connector.
Selects whether to superimpose (On)
or not impose (Off) the recording
status indication on the following
two outputs.
• Output from the VIDEO OUT
connector with Input/Output >Video
Out Super set to [On]
• Output from the SDI connector and
the HDMI connector with Input/
Output >SDI/HDMI Out Super set to
[On]