Sony PMW-320K Operating Instructions Manual page 17

a REC START (recording start) button
Press to start recording. Press it again to stop
recording. The effect is the same as that of the
REC button on the lens.
b SHUTTER selector
Set to ON to use the electronic shutter. Push to
SELECT to switch the shutter speed or shutter
mode setting. When this switch is operated, the
new setting appears on the viewfinder screen for
about three seconds.
For details, see "Setting the Electronic Shutter"
(page 54).
c FILTER selector
Switches between four ND filters built into this
camcorder.
When this selector is used, the new setting
appears on the viewfinder screen for about three
seconds.
FILTER selector ND filter
setting
1 CLEAR
1
2 / ND (attenuates light to
4
approximately
1
3 / ND (attenuates light to
16
approximately
1
4 / ND (attenuates light to
64
approximately
You can change a MAINTENANCE menu
setting so that different white balance settings can
be stored for different FILTER selector positions.
This allows you to automatically obtain optimum
white balance for the current shooting conditions
in linkage with the filter selection.
For details, see "Adjusting the White Balance"
(page 52).
d MENU knob
Changes the item selection or a setting within the
menu (see page 97).
e AUTO W/B BAL (automatic white/
black balance adjustment) switch
Activates the automatic white/black balance
adjustment functions.
WHITE: Adjust the white balance automatically.
If the WHITE BAL switch (see page 19) is
set to A or B, the white balance setting is
stored in the corresponding memory. If the
WHITE BAL switch is set to PRST, the
BLACK: Adjust the black set and black balance
You can use the AUTO W/B BAL switch even
when the ATW (Auto Tracing White Balance)
function is operating.
If you push the switch to the WHITE side once
more during the automatic white balance
adjustment, the adjustment is cancelled and the
white balance setting returns to the original
setting.
If you push the switch to the BLACK side once
more during the automatic black balance
adjustment, the adjustment is cancelled and the
black balance setting returns to the original
setting.
f MIC (microphone) LEVEL control
Adjusts the input level of audio channels 1, 2, 3
and 4 (see page 59).
Right side (near the front)
1
/ )
4
1
/ )
16
1
/ )
64
a ASSIGN. (assignable) 1/2/3 switches
Locations and Functions of Parts and Controls
automatic white balance adjustment function
does not operate.
automatically.
17