Setting Up Cluster Hardware - Compaq ProLiant DL380 Quick Install Manual

Setting up a cluster includes setting up, cabling, and verifying hardware
components. Use the following sections to set up the Compaq ProLiant
Clusters for SCO UnixWare 7 U/300 for the Compaq ProLiant DL380 Quick
Install Cluster:
I
Assembling the Rack
I
Setting Up the Cluster Nodes
I
Setting Up the External Storage Hardware
I
Cabling the Components
For specific information about individual components, see the documentation
that comes with the component. For information on steps and procedures for
setting up cluster hardware, refer to the documentation that comes with the
hardware.

Setting Up Cluster Hardware

2
Chapter