Kenwood TS-590SG Instruction Manual page 16

2 GETTING ACQUAINTED
A
E
Appears when the VOX (Voice Operated Transmission)
function is ON or the Break-in function is ON for CW
mode {page 31}.
Appears when the Frequency Lock function is ON
{page 56}.
Appears when the Speech Processor function is ON
{page 32}.
Appears when the constant recording function is ON
{page 63}.
Appears when the Antenna output is enabled (DRV
connector) {page 52}.
Appears when the selected Menu No. is in the
Quick Menu list {page 14}. It also appears when the
transceiver is scanning the frequencies between the
slow down frequency points {page 49}.
Appears when Receive Incremental Tuning function is
ON {page 30}.
Appears when Transmit Incremental Tuning function is
ON {page 32}.
—— E ——
Appears when the RX ANT terminal is enabled {page
52}.
Either " " or "
which antenna connector is selected {page 52}.
" " appears while the internal antenna tuner
{page 52} is in-line for operation. "
receiving when the internal antenna tuner is in-line for
operation. " " and " " blink while tuning is in progress
{page 52}.
Appears when the Drive output is enabled (DRV
connector) {page 52}.
8
B
" appears, depending on
" appears while
C
F
—— F ——
(Main Display)
In normal operating mode and various confi guration
modes, it displays the transceiver operating frequency.
In Menu mode, it displays the various menus, and in
Adjustment mode, it displays the adjustment values.
(Sub-display)
When recalling a memory channel, it displays
the Memory Channel name (if one has been
programmed). During split frequency operation, it
displays the frequency. When the following indications
occur simultaneously, information is displayed in the
following order: RIT/XIT frequency, Split frequency,
Memory Name. In Menu mode, it displays a menu
title. In other modes, it displays the confi guration
parameters. When the Morse Code Detector function
is ON, the decoded characters will be displayed.
Appears when the split-frequency operation is ON
{page 24}.
" " appears while VFO A is selected. "
while transmitting on a split channel in VFO A {page
10}. " " appears while Menu A is being accessed in
Menu mode {page 14}.
" " appears while VFO B is selected. "
while transmitting on a split channel in VFO B {page
10}. " " appears while Menu B is being accessed in
Menu mode {page 14}.
" " appears while a simplex memory channel
is selected. " " appears while a split memory
channel is selected {page 43}.
D
" appears
" appears