Advertisement
U
S
E
R
G
U
I
D
E
Our mission is to innovate,
design and deliver superior
audio products that form the
bridge between an artistic
vision and a realized dream.
ROKIT POWERED SERIES
NEAR FIELD
STUDIO MONITOR/SUBWOOFER
GUIDE
KRK SYSTEMS LLC.
9340 De Soto Ave.
Chatsworth, CA 91311 USA
HTTP://WWW.KRKSYS.COM
PART# LITK00017
Advertisement
Table of Contents
Related Manuals for KRK ROKIT POWERED SERIES
Summary of Contents for KRK ROKIT POWERED SERIES
- Page 1 Our mission is to innovate, design and deliver superior audio products that form the bridge between an artistic vision and a realized dream. ROKIT POWERED SERIES NEAR FIELD STUDIO MONITOR/SUBWOOFER GUIDE KRK SYSTEMS LLC. 9340 De Soto Ave. Chatsworth, CA 91311 USA HTTP://WWW.KRKSYS.COM...
- Page 2 “studio standard” for the world's finest engineers, producers and musicians. Now, you can have CAUTION that same KRK sound, attention to detail and commitment at a price that makes Rokit Powered a truly uncommon value. CAUTION...
- Page 3 Save the shipping boxes and all packaging materials in case the unit needs to be returned to your local dealer or KRK Systems, LLC. Please read the warranty card that was included in the shipping carton for your product before shipping to KRK Systems.
-
Page 4: Design Philosophy
Resonances also play a major role in impacting the performance of a speaker. KRK design elements minimize cabinet vibration, speaker frames and cones resonating or standing waves inside the cabinet that impact the performance in a negative way. -
Page 5: Connecting Your System
Rokit monitors. The power On/Off switch is located on the rear panel. A yel- low LED illuminates the trademarked KRK Triangle on the front baffle when power is applied. NOTE: MAKE SURE THAT THE VOLTAGE INDICATOR FOUND IN THE VOLTAGE SELECTOR IS SET TO THE CORRECT VOLTAGE SETTING FOR YOUR VOLTAGE. -
Page 6: Positioning Your Monitors
(See HF Adjustments sections on page 2. Note- These adjustments are only available on the Rokit Powered Series.) A room that is heavily dampened would typically require a high frequency boost. - Page 7 If you are using active (powered) speakers, simply use an XLR 1/4” Phono or RCA to connect the output of the subwoofer directly to the input of the speaker. The out- put marked "Left" should go to your left speaker, and the output marked "Right"...
- Page 8 30 to 80 Hz range or music with robust bass information. Now by mov- ing the SPL meter (or your ears) around the various potential speaker positions in the room, you can listen for where the bass sounds the loudest. That is where the speaker loading would potentially be at its greatest.
-
Page 9: Bass Management Theory
For stereo systems, the process is straightforward. Obtain an SPL (Sound Pressure Level) meter. Set the low-pass filter on the KRK subwoofer back plate to 80 Hz (12 o'clock position) — if you will be using the internal high-pass fil- tered outputs from the subwoofer to the near-field speakers. -
Page 10: Troubleshooting
Before shipping your unit back to KRK for service you must acquire an “RMA” from KRK. Your unit will not be received by the company, nor will any work be done on your unit without this very important number. Please call KRK at 818-534-1580... -
Page 11: Specifications
Shipping Instructions • For the safest possible return to KRK, please use the shipping carton and pack aging that your Rokit Powered was originally shipped in. • KRK cannot be responsible for any damages incurred during the shipping process due to poor packing. Make sure to insure your shipment.