Thanks; Introduction - MC2 Audio E15 Operating Instructions Manual

E Series – E15 & E25 Operating Instructions
Page 5

THANKS

Thank you for choosing an E Series amplifier for your application.
Please spend a little time reading through this manual, so that you obtain the best possible
performance from the unit and become familiar with its operating requirements.
2
All MC products are carefully designed and engineered for cutting-edge performance and
2
world-class reliability. If you would like further information about this or any other MC
product, please contact us.
We wish you many years of service from this amplifier and look forward to hearing from you
in the near future.

INTRODUCTION

These lightweight, modified class AB amplifier have been designed to the same high
2
standards of reliability and sound quality that our customers have come to expect of all MC
audio products.
As with all E Series amplifiers, the E15 and E25 will deliver their rated power over the entire
audio bandwidth, and a resonant switchmode power supply with a large reservoir gives
extremely high peak power without any "bass sag".
Optical limiters keep mains input and output currents within a safe operating area at all
times, whilst maintaining transparent sonic performance.
Power Reduction Circuitry (PRC) controls on the rear panel, linked to the limiter thresholds,
allow each channel to be independently set so that different speakers can be safely
connected to each channel.
Running cool in even the most difficult conditions, the E15 can deliver over 850W(E25: 1300W)
into 4 ohms with both channels driven, and an impressive 3100W (4R) bridged (E25: 4800W),
with outstanding distortion and noise figures right up to maximum output.
The amplifier, of course, includes full DC, VHF, thermal and short circuit protection to ensure
continuous trouble-free service.