Thanks; Introduction - MC2 Audio E475 Operating Instructions Manual

E Series – E475 Operating Instructions
Page 5

THANKS

Thank you for choosing an E Series amplifier for your application.
Please spend a little time reading through this manual, so that you obtain the best possible
performance from the unit and become familiar with its operating requirements.
2
All MC products are carefully designed and engineered for cutting-edge performance and
2
world-class reliability. If you would like further information about this or any other MC
product, please contact us.
We wish you many years of service from this amplifier and look forward to hearing from you
in the near future.

INTRODUCTION

The E475 is a lightweight, class AB amplifier, designed to the same high standards of
2
reliability and sound quality that our customers have come to expect of all MC products.
Proprietary current driven output stages give exceptional transient response and a resonant
switchmode power supply with a large reservoir gives extremely high peak power without any
"bass sag".
Optical limiters keep mains input and output currents within a safe operating area at all
times, whilst maintaining transparent sonic performance.
The amplifier features automatic impedance sensing and changes the power accordingly and
coupled with user switchable Power Reduction Control, allows different speaker loads to be
more safely connected to each channel.
This enables the amplifier to drive the high voltage swings associated with speaker
impedances of 8 Ohms and above, but automatically switches to a high current/medium
voltage output required by 4 Ohm loads.