Table of Contents
Advertisement
Back Panel Description,
continued
Note
Fuses must be replaced with the fuse value specified on the KA V-250a/3 back panel
Use a 20 amp slow-blow line fuse for 100/120 V systems or a 12 amp slow-blow line
fuse for 220/240 V systems.
Remote Controls
27 12 VDC Remote Power Out
28 12 VDC Remote Power In
The KAV-250a/3 is equipped with an output that sends 12 VDC power on/off (12
trigger) signals to other Krell components and other devices that incorporate
12 V trigger. This allows you to turn the KAV-250aJ3 on and off using a Krell or other
component in a custom installation.
Notes
12 VDC Out/In (12 V trigger) remote power is limited to 30 ma.
Consult the owner's manual of each component used in a custom installation to take full
advantage of the KA V-250a/3 remote capability.
Power Supply
29 IEC Power Connector
The KAV-250a/3 is equipped with a standard female IEC power connector, for use with
the provided AC power cord.
KAV-250a and KAV-250a/3 Amplifiers
13
Hide quick links:
Advertisement
Table of Contents
