Back Panel Description: Kav-250A/3 - Krell Industries Three-Channel Power Amplifier KAV-250a/3 Instructions For Use Manual

Back Panel Description: KAV-250a/3
See Figure 4 on page 11
The KAV-250a/3 back panel provides connections for all inputs and outputs, remote
control input and output links, and AC power supply. Inputs and outputs labeled left and
right are on the left and right side of the amplifier, respectively, when viewing the
amplifier from the front panel.
Balanced Inputs
16, 17, 18 Inputs
These are the right (16), center (17), and left (18) KAV-250a/3 channe~ inputs
output devices with balanced XLR connectors.
Single-ended Inputs
19, 20, 21 Inputs
These are the right (19), center (20), and left (21) KAV-250a/3 channel inputs
output devices with single-ended RCA connectors.
Amplifier Channel Outputs
22, 23, 24 Outputs
These are the right (22), center (23), and left (24) KAV-250a/3 amplifier channel
outputs with five-way loudspeaker binding posts. The loudspeaker binding post
terminals accept spade lugs, bare wire, banana plugs, or pins. Use the red terminal for
the positive connection and the black terminal for the negative connection. For
information about loudspeaker connections for bridged operation, see Reconfiguring
the KA V-250aJ'3 for Bridged Operation, on page 21.
Fuses
25 AGC-12 Fuses
The AGC 12 Volt loudspeaker fuses protect the KAV-250a/3 against short circuits in
loudspeaker output.
26 Line Fuse
The line fuse protects the KAV-250a/3 against short circuits in internal power supplies.
12
KAV-250a and KAV-250aJ3 Amplifiers