How To Use; Setting And Using The Water Heater - State Water Heaters Gas Water Heater Owner's Manual And Installation Manual

How to Use (For N-063S)

Setting and Using the Water Heater

The factory temperature setting is 120°F (fixed). Mix with cold water with a mixing valve
or at the fixture for desired temperature.
1
Check that electrical power is connected.
2
Turn on hot water.
scalding. scalding.
4
Turn off the hot water.
If you want to the temperature to be changed to 130°F or 140°F, contact the installer or sales agent.
WARNING
High Temperature
10
To prevent scalding.
Check the temperature of the running hot
water before using. Temperatures above
125°F can scald instantly.
3
Mix for desired temperature.
The electrical power does not need to
be disconnected between uses.