Xenyx 1622FX User Manual
  1. Manuals
  2. Brands
  3. Xenyx Manuals
  4. Music Mixer
  5. 1622FX
  6. User manual

Xenyx 1622FX User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User’s Manual
Version 1.0
January 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1622FX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Xenyx 1622FX

Summary of Contents for Xenyx 1622FX

  • Page 1 User’s Manual Version 1.0 January 2006...

  • Page 2: Important Safety Instructions

    XENYX 1622FX/1832FX/2222FX/2442FX IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.

  • Page 3: Table Of Contents

    5.4 Direct outputs (2442FX only) ........13 5.5 Voltage supply, phantom power supply Thanks to the quality and ease of use of your new XENYX and fuse ............... 13 mixing console you'll soon come to appreciate that I, both...

  • Page 4: General Mixing Console Functions

    Britain, which and add as little noise to it as possible. The XENYX Mic are renowned throughout the world for their incredibly warm Preamp performs this role beautifully, leaving no traces of and musical sound character.

  • Page 5: The User’S Manual

    Each mono input channel offers a balanced microphone input via the XLR connector and also features switchable +48 V phantom power supply for condenser microphones. The XENYX preamps provide undistorted and noise-free gain as is typically known only from costly outboard preamps.

  • Page 6: Equalizer

    XENYX 1622FX/1832FX/2222FX/2442FX the MID control to set the amount of boost or cut, and the FREQ Insert points enable the processing of a signal with dynamic control to determine the central frequency. processors or equalizers. They are sourced pre-fader, pre-EQ and pre-aux send.

  • Page 7: Routing Switch, Pan, Solo And Channel Fader

    The CLIP-LED lights up when the input signal is driven too high. If this happens, back off the TRIM control and, if necessary, For level matching, the stereo inputs on the 1622FX, 1832FX check the setting of the channel EQ.

  • Page 8: Routing Switch, Solo And Channel Fader

    If you use an aux send for nal) effects device. monitoring, the associated unused stereo aux returns are 1622FX and 1832FX: On these consoles, this function is available for other line level signals (e.g. keyboards). performed by the AUX SEND 2 control (FX).

  • Page 9: The Monitor Section Of The 1832Fx

    The two right-hand STEREO AUX RETURN controls have a special function: they can be used to add an effect to a monitor mix. An example follows (1622FX wired to an effects device): In this instance, your effects device should be set up as follows:...

  • Page 10: Supplement To 1832Fx

    If you wish to route the effect signal to the monitor mix, you 2-track recorder (e.g. DAT recorder), or they can be used as stereo line input. The output signal of a second XENYX or the can also switch aux 1 to pre-fader, drive the effect device from...

  • Page 11: Lamp Socket (2442Fx Only)

    XENYX 1622FX/1832FX/2222FX/2442FX via the high-precision MAIN MIX fader. When recording to digital recorders, the recorder’s meter should not go into overload. This is because, unlike analog recordings, it takes only slightly excessive levels to create unpleasant digital distortion. When recording to analog, the VU meters of the recording machine should reach approx.

  • Page 12: Subgroups And Main Mix Fader

    XENYX 1622FX/1832FX/2222FX/2442FX The switch turns on the FBQ Feedback Detection You can connect headphones to this 1/4" stereo jack (2442FX: System. It uses the LEDs in the frequency band 2 phones jacks). The signal routed to the PHONES connection is faders to indicate the critical frequencies.

  • Page 13: Main Mix Outputs, Insert Points And Control Room Outputs

    1/4" phone jacks carry the main mix signal in a balanced stereo phone plug on the console side (tip and ring connected). format (1622FX: here, the phone jack outputs are unbalanced and located on the front panel). 5.4 Direct outputs (2442FX only)

  • Page 14: Rack Mounting

    XENYX 1622FX/1832FX/2222FX/2442FX which meets the required safety standards. Blown fuses must only be replaced by fuses of the same type and rating. The mains connection is made via a cable with IEC mains connector. An appropriate mains cable is supplied with the equipment.
  • Page 15 XENYX 1622FX/1832FX/2222FX/2442FX Fig. 6.4: 1/4" stereo plug Fig. 6.5: Insert send/return stereo plug Fig. 6.6: Stereo plug for headphones connection 6. INSTALLATION...

  • Page 16: Specifications

    Max. output level +28 dBu @ 0 W source resistance -134 dB / 135.7 dB A-weighted +22 dBu (1622FX) @ 50 W source resistance -131 dB / 133.3 dB A-weighted @ 150 W source resistance -129 dB / 130.5 dB A-weighted Type 1/4"...
  • Page 17 XENYX 1622FX/1832FX/2222FX/2442FX terms of this warranty will be repaired or replaced. 8. WARRANTY 2. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which 1.

This manual is also suitable for:

2222fx1832fx2442fx

Table of Contents