Franke filterflow Zurich filter system Installation Manual
Franke filterflow Zurich filter system Installation Manual

Franke filterflow Zurich filter system Installation Manual

Advertisement

Quick Links

franke filTerflow Zurich
filTer sysTem
installation guide & technical information
please retain for future reference

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the filterflow Zurich filter system and is the answer not in the manual?

Questions and answers

Summary of Contents for Franke filterflow Zurich filter system

  • Page 1 Zurich filTer sysTem installation guide & technical information please retain for future reference...
  • Page 2: Section 1: How The System Operates

    Your Franke FilterFlow is supplied as a complete system with the parts required for connection to your Franke filter tap and the cold mains water, including a Franke multi-stage filter cartridge.
  • Page 3: Section 3: Planning Your Installation

    Do not allow the tube to come in to contact with solvents and proprietary cleaners. Section 3: pLanning your inStaLLation Although your Franke FilterFlow system is designed for ease of Backflow prevention installation, careful planning and preparation before commencing To comply with UK Water Supply (Water Fittings) Regulations...
  • Page 4: Section 4: Principal Components

    Stop Valve 15mm comp x 1/2” 9.13001 BSPM Wood Screws x 2 9.24001 ‘O’ Seal for Filter Sump 9.07663 Franke 02 (Franke 01 in Filter Cartridge Republic of Ireland) Section 5: inStaLLation Shut off the mains water supply install the stop valve Install the stopvalve (H) in the chosen position in the adjacent 15mm pipework.
  • Page 5 Turn on the filter tap and allow the filtered water to run for approximately 10 minutes to clear any manufacturing or installation residues. Your Franke FilterFlow water filter is now ready to use (as a precaution we recommend checking for leaks again before retiring for the night).
  • Page 6: Section 6: Maintenance

    ‘O’ Seal (K). important. use only WRAS approved silicon grease for this purpose – an approved grease is available to purchase from Franke FilterFlow; visit www.FrankeFilterFlow.co.uk or contact customer service on 0808 165 0008 Section 7:...
  • Page 7: Section 8: Changing The Cartridge In Your Franke Filterflow

    Before you begin. No special tools are required for this operation. carbon components of the Franke 02 & Franke 01 cartridges are All you will need is a suitable receptacle to catch any spillage and biodegradable. You are welcome to return either the plastic parts a cloth or a sponge handy.
  • Page 8 Franke FilterFlow. misuse, neglect, careless operation or handling of the filter - If any part is no longer available or out of manufacture, Franke system which is not in accordance with the Franke FilterFlow FilterFlow will replace it with a functional alternative.

Table of Contents