Advertisement
KER1P watER filtRation
UndER SinK ChillER Unit
inStallation inStRUCtionS and
USE and CaRE GUidE
This chiller unit is not a water purifier. Use with the KER1P under sink
modular system that includes three types of filter units and a choice of
faucets sold separately.
System tested and certified against NSF/ANSI Standard 42 and 53 for
the reduction of the claims specified on the Performance Data Sheet.
When sold with Pro1 and Pro2 system.
For questions about features, suggested retail price, operation/
performance, parts, accessories or service, call: 1-866-687-7465.
Or visit our website at: www.franke-commercial.com
CertiFied tO
NSF/ANSi 61
0112
036865-012
tAble OF CONteNtS
2
ChillER SafEtY
2
aSSiStanCE oR SERViCE
3
inStallation REQUiREMEntS
3
Tools and Parts
4
Location Requirements
4
Electrical Requirements
5
Water Supply Requirements
5
inStallation inStRUCtionS
5
Install the Chiller
6
ChillER USE
6
Setting the control
6
Draining the Chiller
6
Reconnecting the Chiller
7
BEfoRE CallinG foR SERViCE
7
tRoUBlEShootinG
8
ChillER waRRantY
1
Advertisement
Table of Contents
Related Manuals for Franke KER1P
Summary of Contents for Franke KER1P
- Page 1 UndER SinK ChillER Unit inStallation inStRUCtionS and USE and CaRE GUidE This chiller unit is not a water purifier. Use with the KER1P under sink modular system that includes three types of filter units and a choice of faucets sold separately.
-
Page 2: Assistance Or Service
KER1P watER filtRation KER1P watER filtRation UndER SinK ChillER Unit inStallation inStRUCtionS UndER SinK ChillER Unit inStallation inStRUCtionS and USE and CaRE GUidE and USE and CaRE GUidE ChillER SafEtY inStallation REQUiREMEntS imPOrtANt: Observe all governing codes and ordinances. Check location where the chiller will be installed. Proper installation is your Your safety and the safety of others are very important. -
Page 3: Water Supply Requirements
9 3. Shut off water supply valves. included with faucet 14.75 " [37.47 cm] 4. Install KER1P faucet sold separately. See faucet’s 10. White “water in” collet Installation instructions. 11. Blue “water out” collet part 12 12. “T” quick connect fitting 5. -
Page 4: Troubleshooting
“water out” Push in collet and pull out tubing See Figure C. KER1P watER filtRation KER1P watER filtRation Body Tube Collet UndER SinK ChillER Unit inStallation inStRUCtionS UndER SinK ChillER Unit inStallation inStRUCtionS Figure A Figure B Figure C and USE and CaRE GUidE and USE and CaRE GUidE 7. -
Page 5: One-Year Limited Warranty
The Warrantor promises the original purchaser to repair or replace, at the Warrantor’s option, any part of this KER1P Chiller unit that proves to be inoperative due to a defect in material or workmanship under normal use, for a period of one (1) year from the date of purchase.
Need help?
Do you have a question about the KER1P and is the answer not in the manual?
Questions and answers