Unpacking - Vision TZ58/1800-10 Installation, Operation And Maintenance Manual

Vision Solar Systems - 100 L Gravity Fed Type

Unpacking

It is important when receiving the equipment that you confirm that all the components of the
system are received and are in good order. Listed below is a table of some of the most common
parts ordered with an indication of whether these parts are supplied as standard or as optional
equipment. Please check any additional parts against the original delivery note or invoice.
Description
System Frame (Flat Roof or Pitch Roof as per Order)
Main Tank
Electric Element (Supplied fitted if ordered with Tank)
Thermostat (Supplied fitted if ordered with Tank)
Isolator Switch and Weatherproof Box
24 hour Timer with spring reserve
Reservoir Tank (with Ball Valve fitted)
58 x 2000 x 2 mm Vacuum Tubes
Cold Water Pipe Kit
Hot Water Pipe Kit
Overflow Pipe Kit
Drain Valve
2 x 4 Weatherproof Electrical Box with Isolator
Tempering Valve
Tube Guard (Expanded Metal cover for tubes)
Reporting Problems with This Guide
Please use the fax or email addresses below to report any problems you find in this
guide.
For Further Information and Technical Assistance
Enervision (Pty) Ltd recognizes the need to keep you informed about the availability of
current product information.
For up-to-date product information and a complete listing of sales offices, visit the
Enervision website at: http://www.enervision.co.za
For comprehensive product data sheets, Product Guides and application notes please
contact your local Enervision representative or email: info@enervision.co.za
For technical assistance, contact your local Enervision representative in the first instance,
alternatively phone 0861 111 270 or +27 11 395 3730 or email info@enervision.co.za
Enervision Technical Services
FAX: +27 11 395 4710
EMAIL: info@enervision.co.za
Copyright © 2013 - 2016 Enervision. All Rights Reserved.
Issue 2.0 Mar 2013
Qty Supplied Optional at
as Kit additional
cost

1

1





1

10







6