ADD AN IP CAMERA NOT AUTOMATICALLY DISCOVERED
To add an IP camera to the NVR/hDVR that was not automatically discovered on the network:
1.
Click the new action link in the Add a Camera pane.
New Camera
Action Link
2.
In the Camera settings list, select the brand from the drop-down list, then enter the remaining settings as needed.
Click Save to update the video server with the new IP camera.
3.
EDIT CAMERA SETTINGS
Camera settings, such as the Name, Codec, resolution, frame rate, record mode, etc. can be edited within Control. Note that
changing network settings here for an IP camera must also be performed within the camera setup.
SECTION 3: SYSTEM SETUP
NVR and hDVR Systems Setup Guide
23