Digiop BLK-DH200400D User Manual
  1. Manuals
  2. Brands
  3. Digiop Manuals
  4. DVR
  5. BLK-DH200400D
  6. User manual

Digiop BLK-DH200400D User Manual

H.264 4/8/16-channel dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H.264 4/8/16-Channel DVR

User Manual

Products: BLK-DH200400D, BLK-DH200800D, BLK-DH201600D
PLEASE READ THIS MANUAL BEFORE USING YOUR RECORDER, and always follow the
instructions for safety and proper use. Save this manual for future reference.
BLK-DH20xx00D_RM
9/2/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLK-DH200400D and is the answer not in the manual?

Questions and answers

Related Manuals for Digiop BLK-DH200400D

Summary of Contents for Digiop BLK-DH200400D

  • Page 1: User Manual

    H.264 4/8/16-Channel DVR User Manual Products: BLK-DH200400D, BLK-DH200800D, BLK-DH201600D PLEASE READ THIS MANUAL BEFORE USING YOUR RECORDER, and always follow the instructions for safety and proper use. Save this manual for future reference. BLK-DH20xx00D_RM 9/2/11...
  • Page 2 Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. DIGIOP, Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • Page 3: Table Of Contents

    Table of Contents SECTION 1 Introduction ............... 1 SECTION 2 Hardware Overview .
  • Page 4 9.4.5 Record Disk Setup ............. .66 www.digiop.com...
  • Page 5 9.4.6 OSD Setup ..............67 9.4.7 Language Setup .
  • Page 6 www.digiop.com...

  • Page 7: Introduction

    SECTION 1: INTRODUCTION SECTION 1 Introduction Features H.264 Video Compression • Reliable File System • Live and Event Pop-up • VGA display interface (1280 x 1024) • 4 Channel Audio Recording • Bidirectional Audio • Individual Channel Operation • Motion Detection •...

  • Page 8: Hardware Overview

    Channel keys. For channel 10, press the 0 key. For channel 11, press the +10 and 1 key. For channel 16, press the +10 and 6 key. Press to rewind the video in playback mode.  AUDIO Press to select audio mode such as SINGLE (highlighted channel), MIX (combine all channels), or MUTE (all channels).  www.digiop.com...
  • Page 9 SECTION 2: HARDWARE OVERVIEW Name Description AUDIO Jump/step backward. In playback mode, the playback position moves 60 seconds backward.  Press to fast forward the footage in playback mode.  ALARM Press to enable/disable ALARM operation.  ALARM Jump/Step forward. In playback mode, the playback position moves 60 seconds forward. ...

  • Page 10: Rear Panel

    Spot out 1: Live view screen. CVBS Spot out 2: One channel screen with an event image. AUDIO IN 4 RCA connectors for audio input. AUDIO OUT RCA connector for audio output. Connector for a VGA monitor. RS-232 For factory use only. www.digiop.com...

  • Page 11: Remote Control

    SECTION 2: HARDWARE OVERVIEW Name Description ETHERNET RJ-45 connector for LAN connection. SENSOR IN 4 connectors for sensor device connection. ALARM OUT Connector for alarm reporting device. Provides simple On/Off switching by using a relay. 0.5A/125V, 1A/30V RS-485 RS-485 control terminal POWER SOCKET Connect DC12V 5A adaptor Use with a USB flash drive to archive still images and videos, and upgrade firmware, or use to connect a USB mouse to the...
  • Page 12 System lock – To lock a system when pressing ESC button for 5 seconds. System unlock – To unlock a system when pressing ESC button for 5 seconds. BACKUP To start a backup operations in live or playback mode. To start auto sequencing the screen in full screen mode. (Toggle) www.digiop.com...

  • Page 13: System Setup

    SECTION 3: SYSTEM SETUP SECTION 3 System Setup 3.1 Starting the system for the first time When booting the system for the first time, the following messages appear. After the initialization sequence completes, select your preferred language and set the date and time. When the Set date and time window opens, use the dropdown lists to show the correct date and time, then click Finish.

  • Page 14: Entering The Setup Menu

    In the LOG-IN window, open the virtual keyboard and enter the PASSWORD, or use the direction buttons on the front panel. The default password is “1111”. For improved security, DIGIOP recommends that you change the password at this time. You can select a new password through the SECURITY tab in the SETUP menu.
  • Page 15 SECTION 3: SYSTEM SETUP Virtual Keyboard Button After entering the password, the SETUP window will open. Shift Tab List Left/Right Buttons You can shift the tab list by clicking the left or right buttons in the upper-right corner of the window. Open a menu by clicking the tab.

  • Page 16: Display Menu

    Set the visibility level of the OSD. (0 ~ 100) SEQUENCE Enable/disable sequential display of video in full screen mode. SEQ-DWELL TIME Set the dwell time of each quad-split or 9-channel display in sequential display mode. (3 - 60 seconds) www.digiop.com...

  • Page 17: Record Menu

    SECTION 3: SYSTEM SETUP Item Description CHANNEL Highlight the field with the p or q buttons, use the t or u buttons to display a channel you want, then press SEL. You can also highlight and select the submenu button to open the DiSPLAY PROPERTY window. In the DiSPLAY PROPERTY window, use the p, q, t, and u buttons to highlight a parameter, press SEL, use the p, q, t, and u buttons to change the parameter value, then press SEL.
  • Page 18 Assign the recording mode for each channel. Options are: Continuous, By Motion, By Sensor, By Schedule, or Disable. PRE RECORD Enable/disable pre-event recording. Pre-event recording time is 5 seconds (video from 5 seconds before the event is recorded with the eventt). Only intra-frames are recorded during pre-event recording. www.digiop.com...

  • Page 19: Recording Schedules

    SECTION 3: SYSTEM SETUP Menu Item Description POST EVENT RECORD Set the post event recording time duration for the specified channel. (10 ~ 30 seconds) SENSOR RECORDING Enable setting up to 4 sensors for the specified channel using the p, q, t, or u buttons. AUDIO Enable/disable audio recording for the specified channel.

  • Page 20: Device Menu

    Clicking the DEVICE tab opens the DEVICE menu. To return to SETUP menu, press the ESC button. Table 7. Menu Items in Device Setup Screen Item Description VIDEO OUT Opens a submenu to select the VGA video resolution: 1024 x 768 or 1280 x 1024 www.digiop.com...

  • Page 21: Alarm Out Submenu

    SECTION 3: SYSTEM SETUP Item Description ALARM OUT Set the sensor, motion, and video loss for each alarm. Set the PTZ camera speed, number, type and ID. SPOT-OUT Set the configuration for SPOT 2 monitoring only. CHANNEL Select specified channel for motion zone setup. MOTION ZONE Select either Full Zone or Partial Zone for motion sensing.

  • Page 22: Spot-Out Setup

    Select a channel for spot monitoring. Press SEL and select channel using the p, q, t, and u buttons, then press SEL. 3.4.3 PTZ Setup To control the PTZ functions of the camera, connect the PTZ controller to the RS-485 port on the back of the chassis with CAT 5 (or equivalent) cable. www.digiop.com...

  • Page 23: Motion Zone Setup

    SECTION 3: SYSTEM SETUP RTS-485 D+ RTS-485 D- Open the PTZ submenu by selecting the submenu button. Connect speed dome cameras that support RS-485 directly to the RS-485 port. If the camera is controlled through an RS-232C NOTE interface, use an RS-232C to RS-485 signal converter. Use the PTZ setup screen to select the following options for the camera PTZ controller: CHANNEL: Channel connected to a PTZ device NAME: Protocol type...

  • Page 24: Storage Menu

    SEL again to confirm that value. Move to p, q, t, buttons. To return to setup menu screen, press ESC. the next item you want to change using the p, q, t, www.digiop.com...

  • Page 25: System Menu

    SECTION 3: SYSTEM SETUP Table 10. Menu Items in STORAGE Setup Screen Item Description OVERWRITE If enabled, the DVR will continue recording when the drive is full, overwriting the oldest information first. If disabled, record- ing will stop when the hard drive is full. DISK FORMAT Select YES or NO to format the hard drive (disk).
  • Page 26 Options include: English, Korean, Japanese, SP Chinese, TR Chinese, Czech, Finnish, French, Greek, Italian, Dutch, Norse, Russian, Spanish, Turkish, Polish, Danish, Persian, Croatian, German, Portuguese, Portuguese (Brazil), Arabic.. DATE FORMAT Select the date format using the p, q, t, and u buttons. Options include: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY. www.digiop.com...
  • Page 27 SECTION 3: SYSTEM SETUP Item Description SET DATE & TIME To set the date and time, move the cursor to SET DATE & TIME submenu button using the p, q, t, and u buttons, then press the SEL button. In the SET DATE & TIME window, use the t and u buttons to change the timestamp component value, then press SEL to confirm it and move to the next field.

  • Page 28: Security Menu

    To return to setup menu screen, press the ESC button. the next item you want to change using the the p, q, t, NOTE You must be a user with Admin permissions to configure the SECURITY menu. www.digiop.com...

  • Page 29: Network Menu

    SECTION 3: SYSTEM SETUP Table 12. Menu Items in PASSWORD Setup Screen Item Description PASSWORD CHECK: Select either V or nothing for the functions such as SETUP, PB (playback), PTZ, R/OFF (record off), USER AUTHENTICATION and Network. In the PASSWORD CHECK row, check or uncheck the box to select for all users, or check or uncheck the individual set- tings for each user.
  • Page 30 Set a port number for connecting to network. PORT Port number (default: 5445) WEB PORT Web sever port number (default: 80) PORT FORWARD Set the port forwarding for connecting to network. NETWORK STREAM Set the value for network streaming. www.digiop.com...

  • Page 31: Dhcp Networks

    SECTION 3: SYSTEM SETUP 3.8.1 DHCP networks When the DHCP option is selected, the IP address and other network parameters are automatically assigned by the DHCP server. If the network connection is reset, the assigned network parameters may change. ADSL and other network types that use a variable IP address method use this process to acquire an IP address.

  • Page 32: Lan Networks

    SERVER1: This option allows you to choose one of three free DDNS servers: ddnscenter.com (USA), bestddns.com (EU and other areas), and OKddns.com (Korea). To connect to a network with a domain name, user must register a MAC address and www.digiop.com...

  • Page 33: Network Ports

    SECTION 3: SYSTEM SETUP create a unique domain name to http://www.bestddns.com, http://www.okddns.com or http://www.ddnscenter.com. The DDNS interval can be set from 5 to 60 minutes. SERVER2: This option allows you to connect to a general purpose DDNS server. With this selection, you can enter a DDNS ID and password.

  • Page 34: Network Stream

    SEL again to confirm that p, q, t, buttons. To return to the setup menu, press the ESC value. Move to the next item you want to change using the p, q, t , button. www.digiop.com...
  • Page 35 SECTION 3: SYSTEM SETUP Table 15. CONFIG menu items Item Description SAVE SETUP TO A USB Save the current system configuration to the USB flash drive. Plug the flash drive into the USB port on the front panel and press SEL to start the save process.

  • Page 36: Save Setup

    Item Description LOAD FACTORY Select ON to reset the system to the factory default settings. DEFAULT 3.9 Save setup When configuration changes are made, a SAVE SETUP confirmation window will open. Select YES to save the changes you made. www.digiop.com...

  • Page 37: Live, Search, And Playback

    SECTION 4: LIVE, SEARCH, AND PLAYBACK SECTION 4 Live, Search, and Playback In the Live screen, video inputs from the cameras are displayed the On-screen display (OSD) features as configured in the Display Setup screen. OSD icons that indicate the status of the DVR are shown along the bottom of the screen. Table 16.
  • Page 38 Audio mute. To set audio mute, press the Audio button on the front panel. Single audio channel. To set audio single channel for the selected channel only, press the Audio button on the front panel. To mix audio channels, press the Audio button on the left side. www.digiop.com...

  • Page 39: Search Menu

    SECTION 4: LIVE, SEARCH, AND PLAYBACK Icon Description Indicates that alarm is set. To set the alarm function, press the Alarm button on the front panel. Indicates that the alarm output is activated. Alarm indicator. When an alarm is activated (sensor or motion alarm) in the video channel, this icon will be highlighted bright red. Indicates that a network client is connected to the DVR.

  • Page 40: Time-Line Search

    The TIME-LINE search window is used to find stored video by using the time line bar. Select TIME LINE in the SEARCH menu, then select NEXT. A calendar window will open. The highlighted days in the calendar window indicate that data was recorded at that time. The day selected is highlighted blue. Select the day of interest, then select NEXT. www.digiop.com...

  • Page 41: Event Search

    SECTION 4: LIVE, SEARCH, AND PLAYBACK Marker In the TIME LINE window, the highlighted bars show the time of day when data was recorded. Drag the marker to the time when you want to begin playing a recording, click the channel number of interest, then click NEXT to play the video. To expand the timeline, click the icon in the upper-right corner between the t and u buttons.

  • Page 42: Go To First Time Search

    To perform an archive search (search of recorded video), select ARCHIVE in the SEARCH window. A calendar window will open. The highlighted days in the calendar window indicate that data recorded on those days was archived. Select the day when the data was archived, then select NEXT. www.digiop.com...

  • Page 43: Play Mode

    SECTION 4: LIVE, SEARCH, AND PLAYBACK In the archive list, select the file entry you want to see, then select DISPLAY. In the ARCHIVE IMAGE window, select the media location and format of the archive. To close the ARCHIVE IMAGE window, press ESC. 4.3 PLAY mode Playing a recorded event changes the DVR mode from SEARCH to PLAY.
  • Page 44 Jump/step backward. The playback position moves 60 seconds back. Select to play or pause a recording. u / II u -- Jump/step forward. Playback position moves 60 seconds ahead. Select to fast forward the recording. Select again to increase the fast forward speed. Select to backup video. www.digiop.com...

  • Page 45: Ptz Control

    SECTION 5: PTZ CONTROL SECTION 5 PTZ Control To control the PTZ functions of the camera, select Camera PTZ on the OSD menu. Use the p, q, t, and u buttons to select the channel of the PTZ camera and features you want to control. Table 18.

  • Page 46: Backup

    In playback mode, press the BACKUP button to launch the archiving function. When the BACKUP window opens, select Video clip, then select Next. In the BACKUP window, select the channel(s) you want to backup, the duration, and the file format (AVI or Huge Backup [NFS]), then select Next. www.digiop.com...

  • Page 47: Copy Still Images Or Video From The Archive List

    SECTION 6: BACKUP Select the media you want to back the image onto. If you want to backup the image to a USB flash drive, insert the drive into the USB port on the back or front of the DVR. If you want to backup to a CD or DVD, place a blank CD-R/W or DVD-R/W disk into the DVD drive.

  • Page 48: Playing Backed Up Video Clips

    When the backup is complete, select CLOSE button to return to the LOG list window. 6.4 Playing backed up video clips Video clips are backed up from the DVR in AVI format. These files can be played in Microsoft® Windows® with Window Media® Player and other players compatible with AVI formatted files. www.digiop.com...

  • Page 49: Firmware Upgrade

    DIGIOP Support at: 1.877.972.2522. To upgrade the firmware in your DVR: Obtain the firmware update file from DIGIOP Support. The firmware upgrade file is usually named: “apph_xxxxxx.bin” where “xxxxxx” represents the revision level of the firmware.
  • Page 50 In the Diagnostic screen menu, select USB Upgrade. NOTE To exit the Diagnostics screen and restart the DVR, select Boot Application in the Diagnostic menu. Follow the on-screen instructions to install the firmware upgrade. After the upgrade is completed, select Boot Application to restart DVR. www.digiop.com...

  • Page 51: Ums Single Client Software

    SECTION 8: UMS SINGLE CLIENT SOFTWARE SECTION 8 UMS Single Client Software UMS Single Client software is used to remotely monitor a single DVR. It can be used to display live images from your cameras, search for and play back recorded data, monitor alarms, control PTZ devices, and capture and backup data. In a high bandwidth network, a maximum of four users can access one DVR simultaneously.

  • Page 52: Ums Single Client Initial Display

    Select a Program Folder for the Start menu, then click Next. The UMS client will be installed and a UMS Client icon will appear on the desktop. Close the InstallShield window. 8.3 UMS Single Client initial display To open the UMS Single Client, double-click the icon on the desktop, or open it through the Windows Start menu. www.digiop.com...
  • Page 53 SECTION 8: UMS SINGLE CLIENT SOFTWARE Table 19. UMS Single Client window components Button Function Description Buttons for expanding the image to full screen (press ESC to return to WINDOW CONTROL normal viewing), minimizing the window, expanding window to full screen, and closing the window.

  • Page 54: Setup

    8.4.1 General Setup When the Setup menu is opened, the General options are displayed. General options include: Security Option: Set a password for security options. If set, you must enter the password when accessing any of the security • functions. www.digiop.com...

  • Page 55: Site Setup

    SECTION Save Path: Specify the location backup and still image captures are saved. • Automatic Reconnection: If a user selects this function, the client will automatically try to connect to the previously • connected IP address if the network connection is lost. Display Network Statistics: The client can display network status, bit rate and frame rate.

  • Page 56: Event Setup

    SECTION 8: UMS SINGLE CLIENT SOFTWARE In the Site Addition menu, enter: Model: Select N Series DVR, HD DVR if you are connecting to a BLK-DH200400D, BLK-DH200800D, or BLK-DH201600D DVR • Site Name: Enter an appropriate name for the DVR you will connect to.

  • Page 57: Event Search Setup

    SECTION 8: UMS SINGLE CLIENT SOFTWARE In the Event Setup menu, set the following: Log Path: Click the browse button to identify where event log files are saved. • Log Size: Set the maximum size in megabytes of the event log file space. •...

  • Page 58: Record Setup

    To open the Record Disk menu, click the Disk entry in the left frame of the Setup window. The Disk menu allows you to select the location where recorded data is saved, and the amount of space on the disk to allocate for recordings. www.digiop.com...

  • Page 59: Language Setup

    SECTION 8: UMS SINGLE CLIENT SOFTWARE In the Disk menu, select the storage drive from the dropdown list, then enter the size of the storage buffer in megabytes. Choose either Replace oldest files or Stop recording when the disk is full. Click OK to save your entries and exit the Setup menus. 8.4.7 Language Setup To open the Language menu, click the Language entry in the left frame of the Setup window.

  • Page 60: Bidirectional Audio

    After connecting to the DVR, the UMS Single Client can be used to search for and playback recorded video. Video clips can then be backed up to a USB drive or local hard disk. To open the Search screen, click the Search button. www.digiop.com...
  • Page 61 SECTION 8: UMS SINGLE CLIENT SOFTWARE Table 20. UMS Single Client Search window components Button Function Description Buttons for expanding the image to full screen (press ESC to return to WINDOW CONTROL normal viewing), minimizing the window, expanding window to full screen, and closing the window.

  • Page 62: Searching For And Playing Video Recorded By The Dvr

    Drag the marker on the timeline to the time at which you want to play recorded video. To expand the hour within which the marker lies, click the 0 - 60 button below the time line. Marker Click the PLAY button to begin playing video at the marker position. www.digiop.com...

  • Page 63: Backing Up Video From The Dvr On The Ums Single Client Pc

    SECTION 8: UMS SINGLE CLIENT SOFTWARE 8.6.2 Backing up video from the DVR on the UMS Single Client PC Video recorded in the DVR can be backed up on the PC where the UMS Single Client is installed. Video clips are saved in AVI format. At the UMS Single Client, connect to the DVR.
  • Page 64 A pop-up window will appear when the backup operation is complete. Click OK to close the backup operation. NOTE Video backup can take several minutes to complete, depending on the number of channels selected and the duration of the clip. www.digiop.com...

  • Page 65: Image Capture

    SECTION 8: UMS SINGLE CLIENT SOFTWARE 8.6.3 Image capture A still image of a screen can be captured in either Live mode or Search mode, then saved as a BMP or JPEG file. To capture a still image of the screen, click the Capture button. A Capture menu will open. In the Capture menu, select the options you want, then click OK.

  • Page 66: Ums Multi Client Software

    • Disk space: 1GB • Supported operating systems: Microsoft Windows 2000, XP Professional, XP Home, Vista (Some versions of Windows • Vista are incompatible. Contact DIGIOP for more information.) Network: 10/100BaseT network • DirectX: DirectX 8.1 or higher • 9.2 Installing the UMS Multi Client Insert the provided CD in the CD drive.

  • Page 67: Ums Multi Client Initial Display

    SECTION 9: UMS MULTI CLIENT SOFTWARE Select the program folder and click “Next”. The setup status screen is displayed. Select a Program Folder for the Start menu, then click Next. The UMS Multi Client will be installed and a “UMS Multi Client” icon will be displayed on the desktop.
  • Page 68 SITE LIST controls icons. CONNECT Click to connect to sites selected in the frame above. DISCONNECT Click to disconnect to sites selected in the frame above. SETUP Open the setup menus CAPTURE Capture a still image of the screen. www.digiop.com...

  • Page 69: Setup

    SECTION 9: UMS MULTI CLIENT SOFTWARE Button Function Description EVENT LIST Opens the list of events logged by the UMS Multi Client. PAUSE Freezes the screen ALARM RECORD Enable/disable recording of live video. SPEAKER, MICROPHONE Controls for adjusting the volume of the speaker and microphone. PTZ FOCUS/ZOOM Buttons for controlling PTZ camera focus and zoom (in/out).

  • Page 70: Event Setup

    9.4.2 Event Setup To open the Event menu, click the Event entry in the left frame of the Setup window. The Event menu allows you to configure how the client will display and log event information received from the DVR. www.digiop.com...

  • Page 71: Event Search Setup

    SECTION 9: UMS MULTI CLIENT SOFTWARE In the Event Setup menu, set the following: Log Path: Click the browse button to identify where event log files are saved. • Log Size: Set the maximum size in megabytes of the event log file space. •...

  • Page 72: Record Disk Setup

    In the Disk menu, select the storage drive from the dropdown list, then enter the size of the storage buffer in megabytes. Choose either Replace oldest files or Stop recording when the disk is full. Click OK to save your entries and exit the Setup menus. www.digiop.com...

  • Page 73: Osd Setup

    SECTION 9: UMS MULTI CLIENT SOFTWARE 9.4.6 OSD Setup To open the OSD (On Screen Display) menu, click the OSD entry in the left frame of the Setup window. The OSD menu allows you to select the kinds of information and events messages that appear on the scree. Each site you connect to can be configured differently. After selecting the preferred options in the OSD menu for each site, click OK to save your entries and exit the Setup menus.
  • Page 74 Site Addition Connect In the Site Addition menu, enter: Model: Select N Series DVR, HD DVR if you are connecting to a BLK-DH200400D, BLK-DH200800D, or — BLK-DH201600D DVR Site Name: Enter an appropriate name for the DVR you will connect to.

  • Page 75: Bidirectional Audio

    SECTION 9: UMS MULTI CLIENT SOFTWARE UMS Multi Client DVR Live View 9.5.1 Bidirectional Audio The UMS Multi Client supports bidirectional audio between the client PC and a DVR. To use bidirectional audio, the client PC requires connections for a microphone and speakers. At the DVR, connect a microphone to the audio-in connectors, and a pair of amplified speakers to the audio-out connectors.

  • Page 76: Record

    Events List button. 9.6.1 Remote playback To search for and recorded video from the DVR: At the UMS Multi Client, connect to the DVR. Click the Remote playback button. The client will change from live mode to the Search mode. www.digiop.com...
  • Page 77 SECTION 9: UMS MULTI CLIENT SOFTWARE Table 22. UMS Multi Client search window components Button Function Description SETUP: Opens the Setup menu CAPTURE: Capture a still image of the screen/camera. EVENT LIST: Displays logged DVR events. FUNCTIONS MARK IN: Set the start time at the marker position MARK OUT: Set the end time at the marker position BACKUP: Opens a menu to backup the section of video between the MARK IN time and MARK OUT time...

  • Page 78: Backing Up Video From The Dvr On The Ums Multi Client Pc

    In the calendar frame, click the date when the video of interest was recorded. Drag the marker on the timeline to the time at which you want to play recorded video. Marker To expand the hour within which the marker lies, click the 0 - 60 button above the timeline. www.digiop.com...
  • Page 79 SECTION 9: UMS MULTI CLIENT SOFTWARE Play the video to determine the time where you want to start backing up a clip, then stop the playback and click the MARK IN button. Continue playing the video to determine the time where you want to end the clip, then stop the playback and click the MARK OUT button.

  • Page 80: Local Playback

    PC. Click the day of the recording you want to play, then drag the marker to the time when video was recorded. Click the 0 - 60 button above the timeline to expand the time scale. www.digiop.com...

  • Page 81: Avi Backup During Playback

    SECTION 9: UMS MULTI CLIENT SOFTWARE Use the video play control buttons above the timeline to play the video. 9.7.1 AVI backup during playback Video recorded by the UMS Multi Client is saved on the local PC in .NDB file format. To save the video clip of a recorded file in .AVI file format (compatible with most media players), perform a backup operation: Play the video file that contains the segment you want to save in .AVI format.
  • Page 82 Video backup can take several minutes to complete, depending on the number of channels selected and the duration of the clip. If your media player cannot play the file backed-up in AVI file format, it probably doesn’t use the correct CODEC. Update your NOTE H.264 CODEC and retry playing the file. www.digiop.com...

  • Page 83: Webviewer

    SECTION 10: WEBVIEWER SECTION 10 WebViewer WebViewer is a Microsoft Internet Explorer® (IE) browser based DVR administrative tool. It is embedded in the DVR and loaded into the browser when the DVR is accessed. The DVR can be accessed locally (on the same local network), or from a connection to the Internet (remotely), depending on the network configuration.
  • Page 84 Click the Custom Level... button. In the Settings list, change the following settings from Disable to Prompt: Download unsigned ActiveX controls Initialize and script ActiveX controls not marked as safe for scripting Click OK, then click YES in the Warning window. www.digiop.com...
  • Page 85 SECTION 10: WEBVIEWER In the Internet Options window, click Apply, then click OK to close the window. If your computer operating system is Windows Vista or Windows 7, User Account Control can interfere with the normal NOTE operation of the DVR user interface. To disable UAC, open the Control Panel > User Account > User Account window, clear the Use User Account Control (UAC) to help protect your computer check box, then click OK.
  • Page 86 Used to select and display one channel. SPLIT SCREEN SELECT Used to select the screen split: 2x2, 3x3, 4x4 PAUSE: use to freeze the screen in live mode, or freeze playback. PAUSE / CAPTURE CAPTURE: use to save a snapshot of the current screen. www.digiop.com...
  • Page 87 SECTION 10: WEBVIEWER Button Function Description PTZ DIRECTIONAL Used to control the direction of the selected PTZ camera. CONTROl MOTE Use to mute audio during live mode or playback. ZOOM / FOCUS Use to control the zoom and focus of the selected PTZ camera. SETUP Use to open the Setup menu window.

  • Page 88: Setup

    To exit the Setup menus, click Viewer in the upper-right corner of the screen. 10.2.1 Setup Display Use the Display submenu to setup the sequential viewing of the channel and adjust the video quality of the display. www.digiop.com...

  • Page 89: Setup Record

    SECTION 10: WEBVIEWER 10.2.2 Setup Record Use the Record submenu to setup the recording mode for each camera channel. 10.2.3 Setup Device Use the Device submenu to setup the Device, Alarm out, PTZ, and Spot Out configuration. To enter the device submenus, click the submenu entry under Device.
  • Page 90 SECTION 10: WEBVIEWER Device - Device submenu Device - Alarm Out submenu Device - PTZ submenu www.digiop.com...

  • Page 91: Setup Storage

    SECTION 10: WEBVIEWER Device - Spot Out submenu 10.2.4 Setup Storage Use the Storage submenu to setup the recording configuration of the DVR HDD. 10.2.5 Setup System Use the System submenu to setup the system ID and access control, Date / Time, Send Email configuration, and NTP server access credentials.
  • Page 92 SECTION 10: WEBVIEWER System - Description submenu System - Date / Time submenu System - Send Email submenu www.digiop.com...

  • Page 93: Setup Security

    SECTION 10: WEBVIEWER System - NTP submenu 10.2.6 Setup Security Use the Security submenu to setup the user IDs, passwords, and permissions. To enter the Security submenus, click the submenu entry under Security. Security - User Authentication submenu Security - User Password submenu H.264 DVR User Manual...

  • Page 94: Setup Network

    Network - Port submenu 10.3 DVR Search In Search mode, you can watch video recorded by your DVR, backup video clips, and capture still images from recorded video. To switch to Search mode, click the Search button on the Live mode display. www.digiop.com...
  • Page 95 SECTION 10: WEBVIEWER WebViewer Search window Table 24. WebViewer Search window components Button Function Description Timestamp window. When WebViewer is not connected, it shows the PC time. When WebViewer is connected and showing live video, it indicates the DVR TIMESTAMP timestamp.

  • Page 96: Playing Recorded Video

    Video clips (sections of video tracks) can be backed up and saved for playback on other devices. To backup a video clip, first determine the start time (From), the end time (To), and the channel of the recorded video you want to backup. www.digiop.com...

  • Page 97: Capture

    SECTION 10: WEBVIEWER Playback the recorded video you want to backup. While watching the video, determine the exact starting timestamp and ending timestamp of the video clip you want to backup. Click Stop to stop the video playback. Click Backup to open the backup menu. In the Backup window, edit the From (starting timestamp), To (ending timestamp), and File (save to location) fields as needed.

  • Page 98: Specifications

    SECTION 11: SPECIFICATIONS SECTION 11 Specifications Table 25. Specifications ITEM BLK-DH200400D BLK-DH200800D BLK-DH201600D Channel, Input Level 4 channel, composite 8 channel, composite 16 channel, composite Input Signal Format NTSC Video Loss Check Video Main Monitor Output 1 VGA (1024 x 768 or 1280 x 1024 @ 60Hz),...
  • Page 99 SECTION 11: SPECIFICATIONS ITEM BLK-DH200400D BLK-DH200800D BLK-DH201600D Interface Type Serial ATA Capacity of 1 HDD 2TB (maximum) Internal HDD No. File System NaFS Storage USB Port 2 (front 1, rear 1) USB Flash drive Video and still image Backup Built-in DVD-R/W...

  • Page 100: Appendix Ahdd Replacement

    > > > OPENING THE DVR ENCLOSURE WILL VOID THE WARRANTY < < < If you need to change the HDD installed in your DVR, return the device to DIGIOP for a factory installation (preserves the warranty), or refer to the HDD compatibility list in Appendix C for recommended HDD models. If installing an HDD, use the following instructions.
  • Page 101 APPENDIX A: HDD REPLACEMENT HDD Power/Data Cable Connector Remove the 4 bracket mounting screws, two on the front side and two on the back side of the HDD. HDD Mounting Screw Bracket Mounting Screws HDD Mounting Screw Carefully lift the HDD and bracket assembly out of the chassis and lay it on a clean, level surface. Remove the brackets from the HDD by removing the four HDD mounting screws.
  • Page 102 8 MB HDP725025GLA380 250 GB 7200 RPM 8 MB WD20EADS 2 TB 7200 RPM 32 MB WD10EACS 1 TB 7200 RPM 16 MB Western Digital ® WD5000AACS 500 GB 7200 RPM 16 MB WD2500AAKS 250 GB 7200 RPM 16 MB www.digiop.com...

  • Page 103: Appendix B Device Log

    APPENDIX B: DEVICE LOG APPENDIX B Device Log The following table is provided as an aid to setting up and logging the analog devices on your system. Analog Camera Device Summary Channel Camera Model Audio (Y/N) Location H.264 DVR User Manual...

  • Page 104: Appendix Cdvr Setup Menu Components

    APPENDIX C: SETUP MENU COMPONENTS APPENDIX C DVR Setup Menu Components The following lists show the components in each SETUP menu tab (submenu). www.digiop.com...
  • Page 105 APPENDIX C: SETUP MENU COMPONENTS H.264 DVR User Manual...

This manual is also suitable for:

Blk-dh201600dBlk-dh200800d

Table of Contents