Changing The Water Filter - Samsung RF4267HA User Manual

If you don't want to make more ice, touch
( 9 ) Ice Off ( 9 ) Ice Off
this button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you stop ice
making if the following occur:
- There is enough ice in the ice
bucket.
- You want to save water and
energy.
- Water is not being supplied
to the refrigerator.
If the ice maker function is ON, and
the water Line is not connected,
there will be a water valve noise
from the back of the unit, press the
Ice Off (Hold 3sec for child lock)
button for less than 3 seconds until
the Indicator (
If you do not press any button(letters not ICON),
the display turns off in a few seconds. If you press any
button(letters not ICON), the display lights up again.
The function key will operate after you remove
your fi nger from the letters except E.Saver, Ice
and Water key.
Water fi lter usage
( 10 ) Filter ( 10 ) Filter
This icon will light up when you need to
change the fi lter.
After you use about 300 gallons of water,
the fi lter indicator lights up. (about 6 months).
After you install the new water fi lter, reset the
fi lter indicator by touching the Alarm/hold 3
sec for Filter Reset button.
• If water is not dispensing or
dispensing slowly, you need
to replace the water fi lter
because the water fi lter is
clogged.
• Some areas have large
amounts of lime in their water,
which causes the water fi lter
to clog more quickly.

CHANGING THE WATER FILTER

To reduce risk of water damage to your
property, DO NOT use generic brands of
WARNING
water fi lters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from use of a
generic water fi lter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you know when it is
time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red
light comes on just before the capacity of
the current fi lter runs out.
Changing the fi lter on time provides
you with the freshest, cleanest water from your
refrigerator.
1. Shut off the water supply. Then, turn the water
fi lter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water fi lter ( 1 ) from the case fi lter ( 2 ).
) illuminates.
• Sometimes, it is hard to disassemble the water
fi lter because impurities in the water cause it to
stick. If you are having diffi culties, grip the water
fi lter fi rmly and pull it hard.
This is normal. To minimize the water leaks, keep the
fi lter cartridge horizontal
when you pull it.
• To prevent overfl ow,
empty the water fi lter
tray ( 3 ) and dry around
the fi lter case ( 2 ).
3. Insert the new fi lter into the fi lter case ( 4 ).
4. Push the fi lter, and then turn it clockwise until it
locks.
• The locked symbol should be lined up with the
indicator line.
• To change the water fi lter more easily, shut
off the water supply valve.
• When you pull the water fi lter, a little water
can leak from the opening.
• If you have trouble inserting the water fi lter
because of high water pressure, shut off
the water supply valve.
4
(Red) (Red)
2
1
2
3
operating _13