Download Print this page

AER Alpha Operation Instructions Manual page 2

Hide thumbs Also See for Alpha:

Advertisement

Alpha
2. Precautionary Measures
When you use your Alpha, always take basic safety precautions to reduce to a minimum the risk of in-
jury by fire or by electric shock. Read all the directions in these operating instructions and make sure
that you understand them.
Pay attention to all warnings, instructions and
supplementary text written on the Alpha.
Always use a grounded mains connection with the
appropriate supply voltage. If you
are uncertain whether the connection is grounded,
have a qualified expert check it.
Do not let your Alpha come into contact with
water and never touch the amplifier if you have wet
hands.
Always operate your Alpha in a place where no one
can trip over the cables causing injury to themselves
or damage to the cables.
Do not operate your Alpha near devices with strong
electromagnetic fields such as large mains transfor-
mers, generators, neon lights etc.
Do not lay the signal cable parallel to power lines.
Do insure that your Alpha is switched off before
plugging in the power cable to the mains.
Before cleaning your Alpha, unplug it from the mains
supply. Use a damp cloth to clean it. Do not use clea-
ning agents, and be careful that no liquid finds its
way into the amp.
There are no parts within your Alpha that can be
serviced by the user. Refer all repairs and servicing
to an agent authorised by AER.
Any unauthorised repair or servicing will void the
two-year warranty!
-2-
Keep these operating instructions in a safe place.
C

Advertisement

loading