Syscom Video DSP COLOR CAMERA Instruction Manual page 13

• Gamma Switch (on/off) – The gamma correction switch allows .45
correction for non-linearity gain response in the monitor when set to
ON.
When set to OFF, there is no gamma correction.
• AGC Switch (off/on) – The auto gain control switch allows the video
signals to maintain a constant level. This switch is useful when using
the camera at low-light levels and when lighting levels change over
time. For best low light conditions, this switch should set to ON.
AWB1, AWB2 Switch (on/off) – This camera have four white balance
•
setting
ATW (auto tracing white balance) – The camera automatically aim
to maintain white objects as white even if the light color changes.
AWB (auto white balance) – Quick ATW.
Indoor – improves the color balance in areas where a mixture of light
sources exist.
Outdoor – Improves the color balance in arrears where day light is
the main source of light.
SW8
on
on
off
off
8. Power Input Terminal – This terminal accepts a 12V DC power source
from a 12V DC +/- 20% using a UL-listed Class 2 power supply only.
9. Video Out BNC Connector – This BNC connector provides a 1.0 Vp-
p/75 Ohms composite video signal.
Switch Position
SW9
on
off
on
off
Mode
ATW
AWB
Indoor
Outdoor
Switch
SW8 9
5